Commit 6a1cbb5d authored by Peter Zumbruch's avatar Peter Zumbruch
Browse files

continued streamlining

parent 28d635e7
......@@ -20,16 +20,17 @@
# CONFIG_SITE file.
TEMPLATE_TOP=$(EPICS_BASE)/templates/makeBaseApp/top
SUPPORT=/usr/local/epics/synApps_5_6/support
# If using the sequencer, point SNCSEQ at its top directory:
SNCSEQ=/home/epics/EPICS/EPICS-3.14.12.4/modules/soft/seq/seq-2.1.16
SNCSEQ=$(SUPPORT)/seq-2-1-3
# EPICS_BASE usually appears last so other apps can override stuff:
EPICS_BASE=/home/epics/EPICS/EPICS-3.14.12.4/base
EPICS_BASE=/usr/local/epics/base-3.14.12.5
ASYN=/home/epics/EPICS/EPICS-3.14.12.4/modules/soft/asyn/asyn4-23
ASYN=$(SUPPORT)/asyn-4-18
STREAM=/home/epics/EPICS/EPICS-3.14.12.4/modules/soft/StreamDevice/StreamDevice-2-6
STREAM=$(SUPPORT)/stream-2-5-1
# EPICS_BASE usually appears last so other apps can override stuff:
#EPICS_BASE=$(EPICS_HOME)/base
......@@ -37,3 +38,4 @@ STREAM=/home/epics/EPICS/EPICS-3.14.12.4/modules/soft/StreamDevice/StreamDevice-
# Set RULES here if you want to take build rules from somewhere
# other than EPICS_BASE:
#RULES=/path/to/epics/support/module/rules/x-y
# RELEASE - Location of external support modules
#
# IF YOU MAKE ANY CHANGES to this file you must subsequently
# do a "gnumake rebuild" in this application's top level
# directory.
#
# The build process does not check dependencies against files
# that are outside this application, thus you should do a
# "gnumake rebuild" in the top level directory after EPICS_BASE
# or any other external module pointed to below is rebuilt.
#
# Host- or target-specific settings can be given in files named
# RELEASE.$(EPICS_HOST_ARCH).Common
# RELEASE.Common.$(T_A)
# RELEASE.$(EPICS_HOST_ARCH).$(T_A)
#
# This file should ONLY define paths to other support modules,
# or include statements that pull in similar RELEASE files.
# Build settings that are NOT module paths should appear in a
# CONFIG_SITE file.
TEMPLATE_TOP=$(EPICS_BASE)/templates/makeBaseApp/top
SNCSEQ=$(EPICS_HOME)/modules/soft/seq/seq-2.1.13
ASYN=$(EPICS_HOME)/modules/soft/asyn/asyn4-18
STREAM=$(EPICS_HOME)/modules/soft/StreamDevice/StreamDevice-2-6
# EPICS_BASE usually appears last so other apps can override stuff:
EPICS_BASE=$(EPICS_HOME)/base
EPICS_HOME=/home/epics/EPICS/EPICS-3.14.12.3
......@@ -21,7 +21,7 @@ drvAsynSerialPortConfigure("hadcon2","/dev/ttyUSB0",0,0,0)
## Load record instances
##
#dbLoadRecords ("../../db/hadcon_global.db", "HADCON=${HOSTNAME}:1, PREFIX=, SUFFIX=, device=hadcon2")
dbLoadRecords ("../../db/hadcon_global.db", "HADCON=${HOSTNAME}:1, PREFIX=, SUFFIX=, device=hadcon2")
#dbLoadRecords ("../../db/hadcon_debug_global.db", "HADCON=${HOSTNAME}:1, PREFIX=, SUFFIX=, device=hadcon2")
#dbLoadRecords ("../../db/hadcon_stats.db", "IOC=${HOSTNAME}")
......
#RegAddress must be lower case!
substitute "RegName=PORT$(port),RegAddress=$(PORT), DRVL=0x0, DRVH=0xff"
include "hadcon_atmel_register.template"
include "hadcon_atmel_write_register.template"
substitute "RegName=PIN$(port), RegAddress=$(PIN), DRVL=0x0, DRVH=0xff"
include "hadcon_atmel_read_register.template"
substitute "RegName=PORT$(port),RegAddress=$(PORT), DRVL=0x0, DRVH=0xff, ZNAM_B0=IDLE, ONAM_B0=PULLUP, ZNAM_B1=IDLE, ONAM_B1=PULLUP, ZNAM_B2=IDLE, ONAM_B2=PULLUP, ZNAM_B3=IDLE, ONAM_B3=PULLUP, ZNAM_B4=IDLE, ONAM_B4=PULLUP, ZNAM_B5=IDLE, ONAM_B5=PULLUP, ZNAM_B6=IDLE, ONAM_B6=PULLUP, ZNAM_B7=IDLE, ONAM_B7=PULLUP"
include "hadcon_atmel_read_register.template"
substitute "RegName=DDR$(port), RegAddress=$(DDR), DRVL=0x0, DRVH=0xff, ZNAM_B0=INPUT, ONAM_B0=OUTPUT, ZNAM_B1=INPUT, ONAM_B1=OUTPUT, ZNAM_B2=INPUT, ONAM_B2=OUTPUT, ZNAM_B3=INPUT, ONAM_B3=OUTPUT, ZNAM_B4=INPUT, ONAM_B4=OUTPUT, ZNAM_B5=INPUT, ONAM_B5=OUTPUT, ZNAM_B6=INPUT, ONAM_B6=OUTPUT, ZNAM_B7=INPUT, ONAM_B7=OUTPUT"
substitute "RegName=PIN$(port), RegAddress=$(PIN), DRVL=0x0, DRVH=0xff"
include "hadcon_atmel_register.template"
include "hadcon_atmel_read_register.template"
substitute "RegName=PIN$(port), RegAddress=$(PIN), DRVL=0x0, DRVH=0xff, ZNAM_B0=IDLE, ONAM_B0=TOGGLE, ZNAM_B1=IDLE, ONAM_B1=TOGGLE, ZNAM_B2=IDLE, ONAM_B2=TOGGLE, ZNAM_B3=IDLE, ONAM_B3=TOGGLE, ZNAM_B4=IDLE, ONAM_B4=TOGGLE, ZNAM_B5=IDLE, ONAM_B5=TOGGLE, ZNAM_B6=IDLE, ONAM_B6=TOGGLE, ZNAM_B7=IDLE, ONAM_B7=TOGGLE"
include "hadcon_atmel_write_register.template"
substitute "RegName=DDR$(port), RegAddress=$(DDR), DRVL=0x0, DRVH=0xff, ZNAM_B0=INPUT, ONAM_B0=OUTPUT, ZNAM_B1=INPUT, ONAM_B1=OUTPUT, ZNAM_B2=INPUT, ONAM_B2=OUTPUT, ZNAM_B3=INPUT, ONAM_B3=OUTPUT, ZNAM_B4=INPUT, ONAM_B4=OUTPUT, ZNAM_B5=INPUT, ONAM_B5=OUTPUT, ZNAM_B6=INPUT, ONAM_B6=OUTPUT, ZNAM_B7=INPUT, ONAM_B7=OUTPUT"
include "hadcon_atmel_register.template"
include "hadcon_atmel_read_register.template"
include "hadcon_atmel_write_register.template"
#substitute "RegName=PORT$(port),RegAddress=$(PORT), DRVL=0x0, DRVH=0xff, ZNAM_B0=IDLE, ONAM_B0=PULLUP, ZNAM_B1=IDLE, ONAM_B1=PULLUP, ZNAM_B2=IDLE, ONAM_B2=PULLUP, ZNAM_B3=IDLE, ONAM_B3=PULLUP, ZNAM_B4=IDLE, ONAM_B4=PULLUP, ZNAM_B5=IDLE, ONAM_B5=PULLUP, ZNAM_B6=IDLE, ONAM_B6=PULLUP, ZNAM_B7=IDLE, ONAM_B7=PULLUP"
#include "hadcon_atmel_read_register.template"
include "hadcon_atmel_read_IO_port_register.template"
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment