|
|
|
|
|
|
|
|
|
|
|
General notes:
|
|
|
|
* Input fields require pressing the Enter key to accept the value!
|
|
|
|
* Unhandled errors will cause the GUI to flash red, see console output for details
|
|
|
|
* If you see lots of letters `U`, `O` or `D` printed on the console, this indicates a performance issue.
|
|
|
|
|
|
|
|
**Revolution frequency**
|
|
|
|
- Can either be locked (with a PLL) to RF reference signal (connected to RF input 1)
|
|
|
|
or set by the operator to a fixed value
|
| ... | ... | @@ -19,6 +24,3 @@ |
|
|
|
The DAC is limited to ±1 V and signals are clipped if the level is too large, which results in broadband signals and will saturate the amplifiers.
|
|
|
|
Make sure the output for both X and Y is not overloaded (overload ratio shows the percentage in time during which the DAC is overloaded and should stay below 1%).
|
|
|
|
|
|
|
|
**Performance**
|
|
|
|
- If you see lots of letters `U` printed on the console, this indicates a performance issue.
|
|
|
|
|
