wombat issueshttps://git.gsi.de/phelix/lv/wombat/-/issues2021-04-22T07:53:26Zhttps://git.gsi.de/phelix/lv/wombat/-/issues/130File Path in Simulation Offline2021-04-22T07:53:26Zy.zobusFile Path in Simulation OfflineIt would be nice to justify the file path to right, if possible. So, one could see the filename in the config window and not only the first foldersIt would be nice to justify the file path to right, if possible. So, one could see the filename in the config window and not only the first foldersUdo Eisenbarthu.eisenbarth@gsi.deUdo Eisenbarthu.eisenbarth@gsi.dehttps://git.gsi.de/phelix/lv/wombat/-/issues/131SHS Reference Calibrator - Threshold Intensity?2021-04-30T07:29:54Zy.zobusSHS Reference Calibrator - Threshold Intensity?The SHS Reference calibrator in manual mode does not evaluate for a relative amplitudes below 20%.
Not sure if bug or featureThe SHS Reference calibrator in manual mode does not evaluate for a relative amplitudes below 20%.
Not sure if bug or featureUdo Eisenbarthu.eisenbarth@gsi.deUdo Eisenbarthu.eisenbarth@gsi.dehttps://git.gsi.de/phelix/lv/wombat/-/issues/132SHS Reference Calibrator: Include detection of rotation in manual calibration2021-10-01T06:07:08Zj.b.ohlandSHS Reference Calibrator: Include detection of rotation in manual calibrationMinor rotations of the MLA with respect to the camera chip lead to a detection of astigmatism, even when a perfect WF is present. Therefore, one could calculate this small rotation from the position of the focal spots and include that in...Minor rotations of the MLA with respect to the camera chip lead to a detection of astigmatism, even when a perfect WF is present. Therefore, one could calculate this small rotation from the position of the focal spots and include that in the calculation of the reference spots.v1.3 M1Udo Eisenbarthu.eisenbarth@gsi.deUdo Eisenbarthu.eisenbarth@gsi.dehttps://git.gsi.de/phelix/lv/wombat/-/issues/135Improve error handling during startup of executable2021-05-21T13:23:11ZUdo Eisenbarthu.eisenbarth@gsi.deImprove error handling during startup of executableWeird error mesages appear if i.e. daqmx is not installed and root acotr cannot be launched.Weird error mesages appear if i.e. daqmx is not installed and root acotr cannot be launched.https://git.gsi.de/phelix/lv/wombat/-/issues/136WF-Saving dialogue: Fix file naming2021-06-02T12:37:26Zj.b.ohlandWF-Saving dialogue: Fix file namingWFView -> save WF -> save as spreadsheet -> File description says Gradients+MD5, should say WFWFView -> save WF -> save as spreadsheet -> File description says Gradients+MD5, should say WFhttps://git.gsi.de/phelix/lv/wombat/-/issues/137JustX Actor: Performance improvement2021-08-27T13:47:20ZUdo Eisenbarthu.eisenbarth@gsi.deJustX Actor: Performance improvementDo not draw overlay in each DataLoop run but only once the crosses are modified (or the image dimension has changed...)Do not draw overlay in each DataLoop run but only once the crosses are modified (or the image dimension has changed...)https://git.gsi.de/phelix/lv/wombat/-/issues/138Support module submenues2021-06-22T08:10:55ZUdo Eisenbarthu.eisenbarth@gsi.deSupport module submenuesBeacuse of the many modules available use topic submenues....Beacuse of the many modules available use topic submenues....https://git.gsi.de/phelix/lv/wombat/-/issues/139Gradient: Add padding double function2021-08-27T13:47:19ZUdo Eisenbarthu.eisenbarth@gsi.deGradient: Add padding double functionExists in ReconstructorZou (AddPadding) and GradientField (AddInvalidPadding)Exists in ReconstructorZou (AddPadding) and GradientField (AddInvalidPadding)https://git.gsi.de/phelix/lv/wombat/-/issues/141WavefrontView: Handle available reconstructors with contents files2021-08-12T14:51:17ZUdo Eisenbarthu.eisenbarth@gsi.deWavefrontView: Handle available reconstructors with contents filesCurrently the constructor are hard-coded in the corresponding actionCurrently the constructor are hard-coded in the corresponding actionUdo Eisenbarthu.eisenbarth@gsi.deUdo Eisenbarthu.eisenbarth@gsi.dehttps://git.gsi.de/phelix/lv/wombat/-/issues/142Camera: New 'Find cams'2021-09-24T12:12:30ZUdo Eisenbarthu.eisenbarth@gsi.deCamera: New 'Find cams'Place 'Find cams' on main panel and select the corresponding dirver automatically instead of selecting driver and returning cams of this driver...Place 'Find cams' on main panel and select the corresponding dirver automatically instead of selecting driver and returning cams of this driver...v1.3 M1Udo Eisenbarthu.eisenbarth@gsi.deUdo Eisenbarthu.eisenbarth@gsi.dehttps://git.gsi.de/phelix/lv/wombat/-/issues/143WF-Actor: Fix saving-dialogue-naming2021-08-27T13:47:19Zj.b.ohlandWF-Actor: Fix saving-dialogue-namingThe options in the saving dialogue are all over the place.
Current state:
- "Wavefront" -> saves spreadsheet
- "Spreadsheet" -> saves SABER
Suggestion:
- "Wavefront (Spreadsheet)"
- "Gradient + Reference Checksum (SABER)"The options in the saving dialogue are all over the place.
Current state:
- "Wavefront" -> saves spreadsheet
- "Spreadsheet" -> saves SABER
Suggestion:
- "Wavefront (Spreadsheet)"
- "Gradient + Reference Checksum (SABER)"https://git.gsi.de/phelix/lv/wombat/-/issues/144Camera Actor: Save Image default name2021-08-27T13:47:19Zj.b.ohlandCamera Actor: Save Image default nameSaving an image sometimes comes with a couple of seconds of waiting time - where one might have forgotten which camera saves the image. Having a default filename in the dialogue that matches the current camera window name would be very c...Saving an image sometimes comes with a couple of seconds of waiting time - where one might have forgotten which camera saves the image. Having a default filename in the dialogue that matches the current camera window name would be very convenient, e.g. "Camera 1.png" or "PTAS FF.png".https://git.gsi.de/phelix/lv/wombat/-/issues/146set default trigger timeout value2021-07-02T11:20:25ZChristian Brabetzset default trigger timeout valueset default trigger timeout value in camera module. eg 5000 ms.set default trigger timeout value in camera module. eg 5000 ms.https://git.gsi.de/phelix/lv/wombat/-/issues/147AO control chain builder: Display of channel responses during response is mes...2021-07-02T10:12:12Zj.b.ohlandAO control chain builder: Display of channel responses during response is messed up1. Have a circular beam
2. Take a response
3. Enjoy beautiful only-valid square reconstruction channel responses1. Have a circular beam
2. Take a response
3. Enjoy beautiful only-valid square reconstruction channel responseshttps://git.gsi.de/phelix/lv/wombat/-/issues/148CameraAcotr: Crash if changing from GigE driver to e.g. SHS Simulator2021-08-27T13:47:20ZUdo Eisenbarthu.eisenbarth@gsi.deCameraAcotr: Crash if changing from GigE driver to e.g. SHS SimulatorChristian BrabetzChristian Brabetzhttps://git.gsi.de/phelix/lv/wombat/-/issues/149Prohibit dublicate window names2021-08-27T13:47:20Zj.b.ohlandProhibit dublicate window namesScenario:
- Create WOMBAT-Layout with one camera module, automatically named "Camera 1".
- Save layout and close WOMBAT
- Open WOMBAT and load layout
- Open new camera module -> gets default name "Camera 1"
- Now to "Camera 1" windows ar...Scenario:
- Create WOMBAT-Layout with one camera module, automatically named "Camera 1".
- Save layout and close WOMBAT
- Open WOMBAT and load layout
- Open new camera module -> gets default name "Camera 1"
- Now to "Camera 1" windows are open.
That is confusing when using several windows of the same type and working with layouts on a regular basis. One could also thing about prohibiting dublicate names in general, if the user tries to do so, or at least show a warning message.Udo Eisenbarthu.eisenbarth@gsi.deUdo Eisenbarthu.eisenbarth@gsi.dehttps://git.gsi.de/phelix/lv/wombat/-/issues/150Zernike View & Focus Reconstructor: No data source selectable2021-08-27T13:47:20Zj.b.ohlandZernike View & Focus Reconstructor: No data source selectablePerhaps related to the menu tree?
Did not check if other actors have the same problem.Perhaps related to the menu tree?
Did not check if other actors have the same problem.https://git.gsi.de/phelix/lv/wombat/-/issues/151Zernike Offset, Just Cross & Wavefront View: Data src is not selected accordi...2021-10-15T07:46:25Zj.b.ohlandZernike Offset, Just Cross & Wavefront View: Data src is not selected according th the loaded layoutWhen saving a layout with several actors of the same type, the data sorce of the named actors always corresponds to the first fitting source instead of the one that was selected when saving the layout.
-> Src is either not saved or not l...When saving a layout with several actors of the same type, the data sorce of the named actors always corresponds to the first fitting source instead of the one that was selected when saving the layout.
-> Src is either not saved or not loaded correctly.Udo Eisenbarthu.eisenbarth@gsi.deUdo Eisenbarthu.eisenbarth@gsi.dehttps://git.gsi.de/phelix/lv/wombat/-/issues/152Hamamatsu: Trigger timeout not visible2021-07-05T08:35:47Zj.b.ohlandHamamatsu: Trigger timeout not visibleWrong inheritance for config GUI?Wrong inheritance for config GUI?Christian BrabetzChristian Brabetzhttps://git.gsi.de/phelix/lv/wombat/-/issues/153Hamamatsu: Trigger-enabling resets trigger delay2021-07-05T08:47:12Zj.b.ohlandHamamatsu: Trigger-enabling resets trigger delay- open Hamamatsu
- set trigger delay to positive value
- start camera
- enable trigger
- reopen confrig dialogue
- trigger delay is zero again ...- open Hamamatsu
- set trigger delay to positive value
- start camera
- enable trigger
- reopen confrig dialogue
- trigger delay is zero again ...Christian BrabetzChristian Brabetzhttps://git.gsi.de/phelix/lv/wombat/-/issues/154WF Offset Modifier: Display loaded wavefront, even if no data loop input is r...2021-10-15T07:46:25Zj.b.ohlandWF Offset Modifier: Display loaded wavefront, even if no data loop input is receivedJust send the transformed wavefront in advanceJust send the transformed wavefront in advanceUdo Eisenbarthu.eisenbarth@gsi.deUdo Eisenbarthu.eisenbarth@gsi.dehttps://git.gsi.de/phelix/lv/wombat/-/issues/155Just Cross: Display crosses, even if no data loop input is received2021-08-27T13:47:20Zj.b.ohlandJust Cross: Display crosses, even if no data loop input is receivedUpdate crosses if:
- layout is loaded, but camera remains switched off (with a black image?)
- parameters are changed, but data loop do is not calledUpdate crosses if:
- layout is loaded, but camera remains switched off (with a black image?)
- parameters are changed, but data loop do is not calledhttps://git.gsi.de/phelix/lv/wombat/-/issues/156simu Offline: add multiplier2021-07-08T13:07:21ZChristian Brabetzsimu Offline: add multiplier(Jonas) simu Offline: add multiplier für schwach ausgeleuchtete Bilderchern ....(Jonas) simu Offline: add multiplier für schwach ausgeleuchtete Bilderchern ....https://git.gsi.de/phelix/lv/wombat/-/issues/157Perform software chenk only in case of startup errors2021-07-08T13:38:48ZUdo Eisenbarthu.eisenbarth@gsi.dePerform software chenk only in case of startup errorsSoftware check take a considerable amount of time and actually makes only sense if an error accours...Software check take a considerable amount of time and actually makes only sense if an error accours...Udo Eisenbarthu.eisenbarth@gsi.deUdo Eisenbarthu.eisenbarth@gsi.dehttps://git.gsi.de/phelix/lv/wombat/-/issues/158Valid Rectangles Filter: Increase array size2021-07-09T12:30:43Zj.b.ohlandValid Rectangles Filter: Increase array sizeNice feature, but GUI cannot be used with a 4x4 array view ...
![Unbenannt](/uploads/fe23dd8ac3cc83de327af6c2d6450528/Unbenannt.png)Nice feature, but GUI cannot be used with a 4x4 array view ...
![Unbenannt](/uploads/fe23dd8ac3cc83de327af6c2d6450528/Unbenannt.png)https://git.gsi.de/phelix/lv/wombat/-/issues/159Module ID2021-07-12T14:40:01ZUdo Eisenbarthu.eisenbarth@gsi.deModule IDSet Module ID (and possibly name) statically before the module is launched instead of sending a message. There is a certain theorectical risk of publishing an not yet configured module.Set Module ID (and possibly name) statically before the module is launched instead of sending a message. There is a certain theorectical risk of publishing an not yet configured module.https://git.gsi.de/phelix/lv/wombat/-/issues/160Autoconnect srcs2024-03-07T07:07:35ZUdo Eisenbarthu.eisenbarth@gsi.deAutoconnect srcsDoes not work correctly if invalid sources (forming a loop) are found in the list and the first valid one is used...Does not work correctly if invalid sources (forming a loop) are found in the list and the first valid one is used...https://git.gsi.de/phelix/lv/wombat/-/issues/161Camera Actor: Save Image -> Ask if file will be replaced2021-08-12T12:00:30Zj.b.ohlandCamera Actor: Save Image -> Ask if file will be replaced- Have a folder with "Camera 1.png"
- Have a Camera Actor and save an image called "Camera 1.png"
- File is replaced immediately without asking the user
This behaviour actually cost some data during the last beamtime, so asking the user...- Have a folder with "Camera 1.png"
- Have a Camera Actor and save an image called "Camera 1.png"
- File is replaced immediately without asking the user
This behaviour actually cost some data during the last beamtime, so asking the user if the file shall be replaced would be a great thing to have. :-)https://git.gsi.de/phelix/lv/wombat/-/issues/162find cam issue2021-08-12T12:00:30ZChristian Brabetzfind cam issuecamrera module, imaqdx, find cams.
einfach per x wieder zu machen und schon geht nix mehr ...camrera module, imaqdx, find cams.
einfach per x wieder zu machen und schon geht nix mehr ...https://git.gsi.de/phelix/lv/wombat/-/issues/164WF View: Check if valid wavefront exists before saving2021-10-15T07:46:25ZUdo Eisenbarthu.eisenbarth@gsi.deWF View: Check if valid wavefront exists before savingRight after start (without any data) it is possible to save a wavefonr which does not make senseRight after start (without any data) it is possible to save a wavefonr which does not make senseUdo Eisenbarthu.eisenbarth@gsi.deUdo Eisenbarthu.eisenbarth@gsi.dehttps://git.gsi.de/phelix/lv/wombat/-/issues/163Valid Rectangles Filter: Valid Array does not get retrieved from Layout file2021-10-15T07:46:26Zj.b.ohlandValid Rectangles Filter: Valid Array does not get retrieved from Layout file... or is saved in the first place?
Still a useful actor though!... or is saved in the first place?
Still a useful actor though!https://git.gsi.de/phelix/lv/wombat/-/issues/140Harker O'Leary: Move Functions to Gradient2021-10-15T07:46:26ZUdo Eisenbarthu.eisenbarth@gsi.deHarker O'Leary: Move Functions to GradientSome functions implemented which work completely on gradients should be moved to the corresponding classSome functions implemented which work completely on gradients should be moved to the corresponding classhttps://git.gsi.de/phelix/lv/wombat/-/issues/165Add license information2021-10-15T07:46:25ZUdo Eisenbarthu.eisenbarth@gsi.deAdd license informationUdo Eisenbarthu.eisenbarth@gsi.deUdo Eisenbarthu.eisenbarth@gsi.dehttps://git.gsi.de/phelix/lv/wombat/-/issues/167WF Offset: Error while loading from layout file2021-10-15T07:46:25ZUdo Eisenbarthu.eisenbarth@gsi.deWF Offset: Error while loading from layout fileTries to load an empty file path.Tries to load an empty file path.Udo Eisenbarthu.eisenbarth@gsi.deUdo Eisenbarthu.eisenbarth@gsi.dehttps://git.gsi.de/phelix/lv/wombat/-/issues/169Just cross: crosshairs disappear after a certain time?2021-08-30T12:39:57ZUdo Eisenbarthu.eisenbarth@gsi.deJust cross: crosshairs disappear after a certain time?Udo Eisenbarthu.eisenbarth@gsi.deUdo Eisenbarthu.eisenbarth@gsi.dehttps://git.gsi.de/phelix/lv/wombat/-/issues/170AO Degauss: Use GUI update2021-08-31T14:41:45ZUdo Eisenbarthu.eisenbarth@gsi.deAO Degauss: Use GUI updateUse GUIupdate function from framework instead of own functionUse GUIupdate function from framework instead of own functionv1.3 M1https://git.gsi.de/phelix/lv/wombat/-/issues/171AO Control Chain Builder: Use Gui update2021-10-14T08:13:12ZUdo Eisenbarthu.eisenbarth@gsi.deAO Control Chain Builder: Use Gui updatefrom framework instead of onw vifrom framework instead of onw viv1.3 M1https://git.gsi.de/phelix/lv/wombat/-/issues/172AO Control: Use GUI update2021-10-01T10:43:44ZUdo Eisenbarthu.eisenbarth@gsi.deAO Control: Use GUI updatefrom frameworkfrom frameworkv1.3 M1https://git.gsi.de/phelix/lv/wombat/-/issues/173ZernikeOffsetActor: Use GUI update2021-09-14T12:52:29ZUdo Eisenbarthu.eisenbarth@gsi.deZernikeOffsetActor: Use GUI updatefrom frameworkfrom frameworkv1.3 M1https://git.gsi.de/phelix/lv/wombat/-/issues/174FocusREconstructor: Enable save button only if image available2021-09-14T06:44:43ZUdo Eisenbarthu.eisenbarth@gsi.deFocusREconstructor: Enable save button only if image availablev1.3 M1Udo Eisenbarthu.eisenbarth@gsi.deUdo Eisenbarthu.eisenbarth@gsi.dehttps://git.gsi.de/phelix/lv/wombat/-/issues/175ShearplateSimulator: Add Save button2021-09-14T09:24:39ZUdo Eisenbarthu.eisenbarth@gsi.deShearplateSimulator: Add Save buttonv1.3 M1Udo Eisenbarthu.eisenbarth@gsi.deUdo Eisenbarthu.eisenbarth@gsi.dehttps://git.gsi.de/phelix/lv/wombat/-/issues/176SHSSeriesAnalysis: Use GUI update2021-08-31T14:52:54ZUdo Eisenbarthu.eisenbarth@gsi.deSHSSeriesAnalysis: Use GUI updatefrom frameworkfrom frameworkhttps://git.gsi.de/phelix/lv/wombat/-/issues/177TargetFocusActor: USe GUI update2021-08-31T15:00:39ZUdo Eisenbarthu.eisenbarth@gsi.deTargetFocusActor: USe GUI updatefrom frameworkfrom frameworkv1.3 M1Udo Eisenbarthu.eisenbarth@gsi.deUdo Eisenbarthu.eisenbarth@gsi.dehttps://git.gsi.de/phelix/lv/wombat/-/issues/179AnalysisActor: Possible performance improvement2021-09-14T06:45:57ZUdo Eisenbarthu.eisenbarth@gsi.deAnalysisActor: Possible performance improvementOverlay functions take a lot of time. Since the rectangles do not change from frame to frame they can be once stored in a bitmap. After that one can simply use IMAQ Overlay Bitmap.Overlay functions take a lot of time. Since the rectangles do not change from frame to frame they can be once stored in a bitmap. After that one can simply use IMAQ Overlay Bitmap.https://git.gsi.de/phelix/lv/wombat/-/issues/181Shearplate Simulator: crash if IOR < 0.72021-10-01T09:13:22ZUdo Eisenbarthu.eisenbarth@gsi.deShearplate Simulator: crash if IOR < 0.7v1.3 M1Udo Eisenbarthu.eisenbarth@gsi.deUdo Eisenbarthu.eisenbarth@gsi.dehttps://git.gsi.de/phelix/lv/wombat/-/issues/182AnalysisActor: Wrong error display if file not found2021-11-22T09:32:04ZUdo Eisenbarthu.eisenbarth@gsi.deAnalysisActor: Wrong error display if file not foundIf a reference file defined in a layout file is no longer available it show the error: Wrong file format?If a reference file defined in a layout file is no longer available it show the error: Wrong file format?v1.4 M1Udo Eisenbarthu.eisenbarth@gsi.deUdo Eisenbarthu.eisenbarth@gsi.dehttps://git.gsi.de/phelix/lv/wombat/-/issues/183AO Control chain builder does not correctly take response2021-10-08T10:57:14ZUdo Eisenbarthu.eisenbarth@gsi.deAO Control chain builder does not correctly take responseImages on the right stay flatImages on the right stay flatv1.3 M1Christian BrabetzChristian Brabetzhttps://git.gsi.de/phelix/lv/wombat/-/issues/184Add Find devices function to imgsrc_pco library2021-10-12T14:38:38ZUdo Eisenbarthu.eisenbarth@gsi.deAdd Find devices function to imgsrc_pco libraryv1.3 M1Udo Eisenbarthu.eisenbarth@gsi.deUdo Eisenbarthu.eisenbarth@gsi.dehttps://git.gsi.de/phelix/lv/wombat/-/issues/185Add new "Find devices" function to imgsrc_hama2021-10-13T11:35:55ZUdo Eisenbarthu.eisenbarth@gsi.deAdd new "Find devices" function to imgsrc_hamav1.3 M1Udo Eisenbarthu.eisenbarth@gsi.deUdo Eisenbarthu.eisenbarth@gsi.dehttps://git.gsi.de/phelix/lv/wombat/-/issues/186Data Logger: Logging delay while disabling channel2021-11-22T11:18:09ZUdo Eisenbarthu.eisenbarth@gsi.deData Logger: Logging delay while disabling channelIf a channel has a logging delay and is disable the application hangs for the time of this delay.If a channel has a logging delay and is disable the application hangs for the time of this delay.v1.4 M1Udo Eisenbarthu.eisenbarth@gsi.deUdo Eisenbarthu.eisenbarth@gsi.dehttps://git.gsi.de/phelix/lv/wombat/-/issues/188Add general Plot module2021-11-22T09:08:49ZUdo Eisenbarthu.eisenbarth@gsi.deAdd general Plot moduleIt would be nice to have a plot/chart module for online displaying arbitrary numeric values from various modules. Comparable to the logging module.It would be nice to have a plot/chart module for online displaying arbitrary numeric values from various modules. Comparable to the logging module.v1.4 M1Udo Eisenbarthu.eisenbarth@gsi.deUdo Eisenbarthu.eisenbarth@gsi.dehttps://git.gsi.de/phelix/lv/wombat/-/issues/189AO Control: Static channel values not set2021-10-14T14:04:10ZUdo Eisenbarthu.eisenbarth@gsi.deAO Control: Static channel values not setAfter loading the control chain (or after pressung "Neutral") the static channels are not set.After loading the control chain (or after pressung "Neutral") the static channels are not set.v1.3 M1https://git.gsi.de/phelix/lv/wombat/-/issues/190WavefrontOffset: Error in InterpolateGradientField2021-10-25T08:10:33ZUdo Eisenbarthu.eisenbarth@gsi.deWavefrontOffset: Error in InterpolateGradientFieldOpen SHS Cam, take relative reference, load in AnalysisActor, open WavefrontOffset -> Error: Analysis: (Hex 0xFFFFB193) The time points are not in ascending order.Open SHS Cam, take relative reference, load in AnalysisActor, open WavefrontOffset -> Error: Analysis: (Hex 0xFFFFB193) The time points are not in ascending order.v1.4 M1https://git.gsi.de/phelix/lv/wombat/-/issues/191Add module for measurement of Gauss mode / M^22021-12-13T14:00:49ZUdo Eisenbarthu.eisenbarth@gsi.deAdd module for measurement of Gauss mode / M^2v1.5 M1Udo Eisenbarthu.eisenbarth@gsi.deUdo Eisenbarthu.eisenbarth@gsi.dehttps://git.gsi.de/phelix/lv/wombat/-/issues/192plotter: mehrere Cameras & ein Plotter2021-11-22T09:08:50ZChristian Brabetzplotter: mehrere Cameras & ein Plottermehrere Cameras & ein Plotter aufmachen.
beim Plotter die cameras durchwechseln. Geht in aufsteigender Reihenfolge ohne Probleme. Kann danach im Plotter nicht mehr zurück auf Cameras wechseln. Nur die letzte geht noch.mehrere Cameras & ein Plotter aufmachen.
beim Plotter die cameras durchwechseln. Geht in aufsteigender Reihenfolge ohne Probleme. Kann danach im Plotter nicht mehr zurück auf Cameras wechseln. Nur die letzte geht noch.Udo Eisenbarthu.eisenbarth@gsi.deUdo Eisenbarthu.eisenbarth@gsi.dehttps://git.gsi.de/phelix/lv/wombat/-/issues/193Remove sound from MLAAlignment helper2021-11-24T14:14:36ZUdo Eisenbarthu.eisenbarth@gsi.deRemove sound from MLAAlignment helperWe never really used it. In addition it adds some further files and a library to the executable.We never really used it. In addition it adds some further files and a library to the executable.v1.4 M1Udo Eisenbarthu.eisenbarth@gsi.deUdo Eisenbarthu.eisenbarth@gsi.dehttps://git.gsi.de/phelix/lv/wombat/-/issues/196Add the possibility to configure the Bit depth of cameras in the Wombat confi...2023-10-19T08:00:13Zj.hornungAdd the possibility to configure the Bit depth of cameras in the Wombat configurationIt would be nice to have the possibility to choose the bit depth directly in the configuration tab of wombat instead of doing it in NI MAX.It would be nice to have the possibility to choose the bit depth directly in the configuration tab of wombat instead of doing it in NI MAX.https://git.gsi.de/phelix/lv/wombat/-/issues/197Include the Hamamatsu cam within "Find" of the camera module2021-12-10T07:16:13Zj.hornungInclude the Hamamatsu cam within "Find" of the camera moduleThe possibility to select a Hamamatsu camera within "Find" of the camera module is missing. Therefore, it is not possible to currently use a Hamamatsu camera with the current version.The possibility to select a Hamamatsu camera within "Find" of the camera module is missing. Therefore, it is not possible to currently use a Hamamatsu camera with the current version.v1.5 M1https://git.gsi.de/phelix/lv/wombat/-/issues/198Camera: pixel size not written to file2021-12-14T12:28:17ZUdo Eisenbarthu.eisenbarth@gsi.deCamera: pixel size not written to fileSet pixel size to a certain value. Save Image. Read with offline -> Wrong pixel size.Set pixel size to a certain value. Save Image. Read with offline -> Wrong pixel size.v1.5 M1https://git.gsi.de/phelix/lv/wombat/-/issues/199Bug when using "Find Camera" without a Hamamatsu being connected2021-12-13T09:13:16Zj.hornungBug when using "Find Camera" without a Hamamatsu being connectedWhen using "Find" in the camera module without a connected Hamamatsu will lead to an error (See attached screenshot) since tm_initialize_40.vi of Hamamatsu is called.
![error-hamamatsu-find-ohne-hamamatsu](/uploads/ba34a26fc32b3856f822...When using "Find" in the camera module without a connected Hamamatsu will lead to an error (See attached screenshot) since tm_initialize_40.vi of Hamamatsu is called.
![error-hamamatsu-find-ohne-hamamatsu](/uploads/ba34a26fc32b3856f82288b5c61c21f8/error-hamamatsu-find-ohne-hamamatsu.png)https://git.gsi.de/phelix/lv/wombat/-/issues/200Camera module recieves a new image from Hamamatsu if the timeout is exceeded2021-12-13T09:13:16Zj.hornungCamera module recieves a new image from Hamamatsu if the timeout is exceededWhen the timeout of the Hamamatsu camera is exceeded, the camera module recieved a second image and loses the previous aquired image. This results in a loss of on-shot images when the timeout is too short and the camera waits for a new t...When the timeout of the Hamamatsu camera is exceeded, the camera module recieved a second image and loses the previous aquired image. This results in a loss of on-shot images when the timeout is too short and the camera waits for a new trigger (shot-mode)https://git.gsi.de/phelix/lv/wombat/-/issues/202rel. Amplitude setzt andere Einstellungen zurück2021-12-17T07:36:13ZChristian Brabetzrel. Amplitude setzt andere Einstellungen zurückrel. Amplitude setzt andere Einstellungen zurück (sowas wie noise, rotation) ... aber nur in der Anzeige ...
bonus fehler: es gehn auch nur noch ganzzalige Werte [0,1] ....rel. Amplitude setzt andere Einstellungen zurück (sowas wie noise, rotation) ... aber nur in der Anzeige ...
bonus fehler: es gehn auch nur noch ganzzalige Werte [0,1] ....v1.5 M1Udo Eisenbarthu.eisenbarth@gsi.deUdo Eisenbarthu.eisenbarth@gsi.de2021-12-17https://git.gsi.de/phelix/lv/wombat/-/issues/205Gauss mode measurement: Calc Rayleigh length2022-10-12T10:50:53ZUdo Eisenbarthu.eisenbarth@gsi.deGauss mode measurement: Calc Rayleigh lengthCalculate Rayleigh length based on the current (fitted) waist. This gives an estimate about the min/max cam position to be used for a proper M^2 measurement.Calculate Rayleigh length based on the current (fitted) waist. This gives an estimate about the min/max cam position to be used for a proper M^2 measurement.https://git.gsi.de/phelix/lv/wombat/-/issues/206Wavefront Offset: Loaded SABER file is not applied2022-02-28T09:46:37Zj.b.ohlandWavefront Offset: Loaded SABER file is not appliedThe loaded WF is displayed, but not applied in the data loop. Also, the MD5-Checksum does indicate a mismatch, even though it shoudln't ...The loaded WF is displayed, but not applied in the data loop. Also, the MD5-Checksum does indicate a mismatch, even though it shoudln't ...https://git.gsi.de/phelix/lv/wombat/-/issues/207Autocorrelation mode2023-10-26T12:26:08Zy.zobusAutocorrelation modeSimple module to be used for autocorrelation evaluation:
- single input-field for calibration value: fs/px or ps/px or whatsoever
- Two selectable areas (e.g. like the rectangles in NearFieldanalysis)
--> one for background aquisition ...Simple module to be used for autocorrelation evaluation:
- single input-field for calibration value: fs/px or ps/px or whatsoever
- Two selectable areas (e.g. like the rectangles in NearFieldanalysis)
--> one for background aquisition and one for the signal
- the signal rectangle should be summed over the x or y axis, such that a 1-d autocorrelation trace remains.
- for this signal a duration (FWHM) should be calculated / determined
- ideally, this value can be plotted via wombat plotterUdo Eisenbarthu.eisenbarth@gsi.deUdo Eisenbarthu.eisenbarth@gsi.dehttps://git.gsi.de/phelix/lv/wombat/-/issues/208Metadata for FROG-Trace Evaluation2022-07-14T08:00:40Zy.zobusMetadata for FROG-Trace EvaluationWhen logging the full data set of the frog evaluation, it would be nice to also save the binned image for later comparison of the original and the reconstructed trace.
Further, metadata like the calibration, the corner coordinates of the...When logging the full data set of the frog evaluation, it would be nice to also save the binned image for later comparison of the original and the reconstructed trace.
Further, metadata like the calibration, the corner coordinates of the selected ROI, g-error, "Fit Spec", "Fit-Time" or in general the settings of the reconstruction would be useful.j.hornungj.hornunghttps://git.gsi.de/phelix/lv/wombat/-/issues/209Crosses in JustCross disappears2024-02-21T16:12:47Zj.hornungCrosses in JustCross disappearsThe center cross and all other crosses sometimes disappear and only show when pressing the "CX" button.The center cross and all other crosses sometimes disappear and only show when pressing the "CX" button.Udo Eisenbarthu.eisenbarth@gsi.deUdo Eisenbarthu.eisenbarth@gsi.dehttps://git.gsi.de/phelix/lv/wombat/-/issues/210Camera Configuration window: The values displayed don't always match the valu...2022-12-19T09:56:43Zd.posorCamera Configuration window: The values displayed don't always match the values that are being usedIn the Camera module there is the option "SimulationOffline" to use a file as input. When you choose this, then you can use the Camera Configuration window to select an image and change some paramters like rotation or noise.
When you ch...In the Camera module there is the option "SimulationOffline" to use a file as input. When you choose this, then you can use the Camera Configuration window to select an image and change some paramters like rotation or noise.
When you change some of these parameter values and afterwards select an image, then wombat applies all these changes on the image as expected. But the moment the image had been selected, all the parameter values in the Camera Configuration window jump back to default, even though the chosen non-default parameter values are being applied.
The intended behavior (I guess) is that the values that are being displayed in the Camera Configuration window always match the values that are being applied to the image.v1.5 M1https://git.gsi.de/phelix/lv/wombat/-/issues/211Use nearfield of SHS Analysis in NF Analysis2022-12-19T11:05:09ZUdo Eisenbarthu.eisenbarth@gsi.deUse nearfield of SHS Analysis in NF AnalysisNF Analysis could also listen to a (strongly reduced) NF delivered from SHS AnalysisNF Analysis could also listen to a (strongly reduced) NF delivered from SHS Analysisv1.5 M1https://git.gsi.de/phelix/lv/wombat/-/issues/212OsciAcq: wrong error message if device not supported by driver?2023-03-14T09:22:22ZUdo Eisenbarthu.eisenbarth@gsi.deOsciAcq: wrong error message if device not supported by driver?If a osci model is not supported by the driver, wombat returns a misleading error message (invalid reference???).If a osci model is not supported by the driver, wombat returns a misleading error message (invalid reference???).https://git.gsi.de/phelix/lv/wombat/-/issues/213Cannot hide Cross in Justcross2023-10-23T11:50:39ZChristian BrabetzCannot hide Cross in JustcrossMöglichkeit zum einzelnen ein und ausblenden von Crosses ?Möglichkeit zum einzelnen ein und ausblenden von Crosses ?https://git.gsi.de/phelix/lv/wombat/-/issues/214New Cross in Justcross, more than one selected2023-10-23T11:50:39ZChristian BrabetzNew Cross in Justcross, more than one selectedWenn man ein neues Cross hinzufügt, wird das letzte nicht abgewählt. Dadruch kann es passieren, dass man beide Cross auf einmal bewegt.Wenn man ein neues Cross hinzufügt, wird das letzte nicht abgewählt. Dadruch kann es passieren, dass man beide Cross auf einmal bewegt.https://git.gsi.de/phelix/lv/wombat/-/issues/215shs valid rect filter2023-06-23T12:52:42ZChristian Brabetzshs valid rect filtershs valid rect filter. löscht scheinbar nicht die referenzen (oder sonst was) beim übergeben an WF reconstruct.
Ist aufgefallen mit Kamera die einen Brandfleck weit ausserhalb des Strahl hat.
Obowhl die rects aus waren, hat reconstruct v...shs valid rect filter. löscht scheinbar nicht die referenzen (oder sonst was) beim übergeben an WF reconstruct.
Ist aufgefallen mit Kamera die einen Brandfleck weit ausserhalb des Strahl hat.
Obowhl die rects aus waren, hat reconstruct versucht das beam profile bis zum brandgleck auszudehnen.https://git.gsi.de/phelix/lv/wombat/-/issues/216Reset button for plotter2023-10-23T11:50:39Zj.hornungReset button for plotterImplement a reset button for the plotter or maybe an on/off button similar to the Img Stati of PCS.Implement a reset button for the plotter or maybe an on/off button similar to the Img Stati of PCS.https://git.gsi.de/phelix/lv/wombat/-/issues/218SHS Analysis: Synchronize # of avgs for both point analysis and beamshape ana...2023-10-23T11:50:39ZUdo Eisenbarthu.eisenbarth@gsi.deSHS Analysis: Synchronize # of avgs for both point analysis and beamshape analysis.Beam shape analysis has its own averaging setting which is often forgotten during a shot (avg=1).Beam shape analysis has its own averaging setting which is often forgotten during a shot (avg=1).https://git.gsi.de/phelix/lv/wombat/-/issues/219Oscilloscope Acq: Improve resource handling2023-12-12T10:05:05ZUdo Eisenbarthu.eisenbarth@gsi.deOscilloscope Acq: Improve resource handlingJust use the raw IP / name of the oscilloscope instead of TCPIP::...Just use the raw IP / name of the oscilloscope instead of TCPIP::...https://git.gsi.de/phelix/lv/wombat/-/issues/220Use post build action for code signing2023-11-22T15:54:31ZUdo Eisenbarthu.eisenbarth@gsi.deUse post build action for code signingInstead of the internal code signing option, use a post build action. This avoids that the executable is deleted if the sign process fails.Instead of the internal code signing option, use a post build action. This avoids that the executable is deleted if the sign process fails.https://git.gsi.de/phelix/lv/wombat/-/issues/222AO Control chain builder: Load Chain button2024-02-21T13:40:11Zb.zielbauerAO Control chain builder: Load Chain buttonWhen trying to load a previously recorded response, the image changes at a glimpse, but then, no images are shown. If mirror does not respond (e.g. ISP server is not running), images are succesfully loaded and you can click through the d...When trying to load a previously recorded response, the image changes at a glimpse, but then, no images are shown. If mirror does not respond (e.g. ISP server is not running), images are succesfully loaded and you can click through the different channels until it crashes due to timeout.Udo Eisenbarthu.eisenbarth@gsi.deUdo Eisenbarthu.eisenbarth@gsi.dehttps://git.gsi.de/phelix/lv/wombat/-/issues/224ValidRectangle filter: not working2024-02-26T15:59:58ZUdo Eisenbarthu.eisenbarth@gsi.deValidRectangle filter: not workingvalid rectangle wavefront filter does not filter anaything.valid rectangle wavefront filter does not filter anaything.