wombat issueshttps://git.gsi.de/phelix/lv/wombat/-/issues2019-04-10T11:51:19Zhttps://git.gsi.de/phelix/lv/wombat/-/issues/64SHS Analysis: Remove Tilt from Ref does not clear ShiftsAVG array.2019-04-10T11:51:19ZUdo Eisenbarthu.eisenbarth@gsi.deSHS Analysis: Remove Tilt from Ref does not clear ShiftsAVG array.Load Reference, Introduce Tilte in Simulator, Set NrOfAverages >20, Press Ingore Tilt -> Instant reaction in WaveFrontView
Press Remove Tilt -> Slow reaction in Wavefron...Load Reference, Introduce Tilte in Simulator, Set NrOfAverages >20, Press Ingore Tilt -> Instant reaction in WaveFrontView
Press Remove Tilt -> Slow reaction in WavefrontViewv1.0https://git.gsi.de/phelix/lv/wombat/-/issues/65AdatpiveOptics Actor: Remove "Sim Failure" button.2019-04-10T11:51:20ZUdo Eisenbarthu.eisenbarth@gsi.deAdatpiveOptics Actor: Remove "Sim Failure" button.This was only for development and should not got into stable version.This was only for development and should not got into stable version.v1.0Udo Eisenbarthu.eisenbarth@gsi.deUdo Eisenbarthu.eisenbarth@gsi.dehttps://git.gsi.de/phelix/lv/wombat/-/issues/66"New" command generates crash....2019-04-10T11:51:19ZUdo Eisenbarthu.eisenbarth@gsi.de"New" command generates crash....Open two or more actors. Save as default layout. Press "New" -> crash. The problem here ist that all modules are killed more or less at once. Each closing module ist handled in MainActor:LastAck which publishes a list of open modules. Me...Open two or more actors. Save as default layout. Press "New" -> crash. The problem here ist that all modules are killed more or less at once. Each closing module ist handled in MainActor:LastAck which publishes a list of open modules. Meanwhile tihs list might become invalid....v1.0Udo Eisenbarthu.eisenbarth@gsi.deUdo Eisenbarthu.eisenbarth@gsi.dehttps://git.gsi.de/phelix/lv/wombat/-/issues/67Add "Alignment mode" to Zernike view.2021-04-22T08:53:35ZUdo Eisenbarthu.eisenbarth@gsi.deAdd "Alignment mode" to Zernike view.Display certain Zernike coeffs in a large display to allow for aligning the laser system with a distance from a PC monitor.Display certain Zernike coeffs in a large display to allow for aligning the laser system with a distance from a PC monitor.https://git.gsi.de/phelix/lv/wombat/-/issues/68Use new ImgSrc functionality: Pixel size2019-04-10T11:51:19ZUdo Eisenbarthu.eisenbarth@gsi.deUse new ImgSrc functionality: Pixel sizeThis way the SHS reference calibrator does no longer need a separate pixel size entry. Also the NF analysis would benefit from this.This way the SHS reference calibrator does no longer need a separate pixel size entry. Also the NF analysis would benefit from this.Udo Eisenbarthu.eisenbarth@gsi.deUdo Eisenbarthu.eisenbarth@gsi.dehttps://git.gsi.de/phelix/lv/wombat/-/issues/69AO Control Error: Number of channels do not match while loading control chain...2019-04-10T11:51:19ZUdo Eisenbarthu.eisenbarth@gsi.deAO Control Error: Number of channels do not match while loading control chain fileReference, control chain file all taken in the same application version.....Reference, control chain file all taken in the same application version.....v1.0https://git.gsi.de/phelix/lv/wombat/-/issues/70AO ChainBuilder Improvement2019-04-10T11:51:21ZUdo Eisenbarthu.eisenbarth@gsi.deAO ChainBuilder ImprovementDisplay a warning if a response has been measured but not saved if the module ist going to be closed.Display a warning if a response has been measured but not saved if the module ist going to be closed.https://git.gsi.de/phelix/lv/wombat/-/issues/71SimpleCtrlActor: Update the "Power On/Off"-button corresponding to the mirror...2019-04-10T11:51:21Zj.b.ohlandSimpleCtrlActor: Update the "Power On/Off"-button corresponding to the mirror state1: Open SimpleCtrlActor
2: Push "Power On/Off"
3: Switch driver
-> The AdaptiveOpticsActor displays that HV is off, but the control-button in the SImpleCtrlActor remains enabled.1: Open SimpleCtrlActor
2: Push "Power On/Off"
3: Switch driver
-> The AdaptiveOpticsActor displays that HV is off, but the control-button in the SImpleCtrlActor remains enabled.https://git.gsi.de/phelix/lv/wombat/-/issues/72Test Autooptimization of static electrodes in situ2019-03-08T09:15:37Zj.b.ohlandTest Autooptimization of static electrodes in situv1.0Udo Eisenbarthu.eisenbarth@gsi.deUdo Eisenbarthu.eisenbarth@gsi.dehttps://git.gsi.de/phelix/lv/wombat/-/issues/73SHS-Analysis: Always include the unfiltered gradient field in the variant2021-08-26T13:41:28Zj.b.ohlandSHS-Analysis: Always include the unfiltered gradient field in the variantRelated to #16: For the phase retrieval algorithm, the field of view of the farfield camera has to be determined. This only works by introducing a knwon amount of tilt to the WF and observe the shift in the farfield.
Therefore, when reco...Related to #16: For the phase retrieval algorithm, the field of view of the farfield camera has to be determined. This only works by introducing a knwon amount of tilt to the WF and observe the shift in the farfield.
Therefore, when recording a response, the tilt has to be included (later on this will come down to an "unfiltered WF", see #25).
In the regular control loop, the filtered aberrations have to be removed from the control matrix, so filtering the zernike-polynomials does not result in an unwanted drift of actuators.https://git.gsi.de/phelix/lv/wombat/-/issues/74SHS Analysis: "Erode" stetting possibly not stored in layout file.2019-04-10T11:51:21ZUdo Eisenbarthu.eisenbarth@gsi.deSHS Analysis: "Erode" stetting possibly not stored in layout file.https://git.gsi.de/phelix/lv/wombat/-/issues/75Add function to delete standard layout file2021-12-09T07:40:29ZUdo Eisenbarthu.eisenbarth@gsi.deAdd function to delete standard layout fileIn particular in case of severe errors during application start.In particular in case of severe errors during application start.https://git.gsi.de/phelix/lv/wombat/-/issues/76AnalysisActor: Beamshape GUI: change window title2019-04-10T11:51:21ZUdo Eisenbarthu.eisenbarth@gsi.deAnalysisActor: Beamshape GUI: change window titlev1.0Udo Eisenbarthu.eisenbarth@gsi.deUdo Eisenbarthu.eisenbarth@gsi.dehttps://git.gsi.de/phelix/lv/wombat/-/issues/78CameraActor: Grab action hangs if camera is not triggered.2021-07-02T15:33:54ZUdo Eisenbarthu.eisenbarth@gsi.deCameraActor: Grab action hangs if camera is not triggered.Hence, other messages such as "Save Image" are not handled....Hence, other messages such as "Save Image" are not handled....https://git.gsi.de/phelix/lv/wombat/-/issues/79Zernike View: Improve display of PtV values and relative error....2019-04-10T11:51:21ZUdo Eisenbarthu.eisenbarth@gsi.deZernike View: Improve display of PtV values and relative error....Similar to wavefront view module.Similar to wavefront view module.https://git.gsi.de/phelix/lv/wombat/-/issues/80All modules: Check possibility to update display if window is unhidden...2021-08-31T13:22:20ZUdo Eisenbarthu.eisenbarth@gsi.deAll modules: Check possibility to update display if window is unhidden...If a hiddewn window is unhidden, the contents are not updated which can be quite confusing.....If a hiddewn window is unhidden, the contents are not updated which can be quite confusing.....v1.3 M1Udo Eisenbarthu.eisenbarth@gsi.deUdo Eisenbarthu.eisenbarth@gsi.dehttps://git.gsi.de/phelix/lv/wombat/-/issues/81SHS Analysis: Errors while working with 12/16 bit images2019-04-16T08:43:45ZUdo Eisenbarthu.eisenbarth@gsi.deSHS Analysis: Errors while working with 12/16 bit imagesIt looks like the threshold of a search rectangle is wrongly calculated. For a 12 bit image all rectangles are considered as valid....It looks like the threshold of a search rectangle is wrongly calculated. For a 12 bit image all rectangles are considered as valid....v1.0Udo Eisenbarthu.eisenbarth@gsi.deUdo Eisenbarthu.eisenbarth@gsi.dehttps://git.gsi.de/phelix/lv/wombat/-/issues/82SHS Analysis: dataloop not started in given time -> crash2019-04-23T14:43:17ZUdo Eisenbarthu.eisenbarth@gsi.deSHS Analysis: dataloop not started in given time -> crashOpen camera, SHS Analysis, load ref, save config, Close app. delete ref. Restart Software: SHS Analysis reports missing file and afterwards "dataloop not started within given time" -> complete Crash....Open camera, SHS Analysis, load ref, save config, Close app. delete ref. Restart Software: SHS Analysis reports missing file and afterwards "dataloop not started within given time" -> complete Crash....v1.0https://git.gsi.de/phelix/lv/wombat/-/issues/83MLA Alignment Helper: Swtich Data Source2019-01-15T15:09:38ZChristian BrabetzMLA Alignment Helper: Swtich Data SourceDoes work sometimes. But does not update if data source is switched most of the time. Tested with two SimulateSHS.
Seems to update only if going back and forth between both tabs.Does work sometimes. But does not update if data source is switched most of the time. Tested with two SimulateSHS.
Seems to update only if going back and forth between both tabs.v1.0https://git.gsi.de/phelix/lv/wombat/-/issues/84SHS Reference Calibrator: Update SHS Device config2019-09-24T08:52:32ZChristian BrabetzSHS Reference Calibrator: Update SHS Device configUpdate SHS Device config as data source changes, if some of the data is present? Like the Nearfield analysis module.Update SHS Device config as data source changes, if some of the data is present? Like the Nearfield analysis module.