wombat issueshttps://git.gsi.de/phelix/lv/wombat/-/issues2019-04-10T11:51:21Zhttps://git.gsi.de/phelix/lv/wombat/-/issues/92Error while loading layout file2019-04-10T11:51:21ZUdo Eisenbarthu.eisenbarth@gsi.deError while loading layout fileApplication crashes if attached layout file is loaded.[PCSPC012_campus_gsi_de.lay](/uploads/7e20e4eda6a98d5ae99d8dbe72fb63b7/PCSPC012_campus_gsi_de.lay)Application crashes if attached layout file is loaded.[PCSPC012_campus_gsi_de.lay](/uploads/7e20e4eda6a98d5ae99d8dbe72fb63b7/PCSPC012_campus_gsi_de.lay)v1.0Udo Eisenbarthu.eisenbarth@gsi.deUdo Eisenbarthu.eisenbarth@gsi.dehttps://git.gsi.de/phelix/lv/wombat/-/issues/88AO Control: error message2019-04-10T11:51:21ZUdo Eisenbarthu.eisenbarth@gsi.deAO Control: error messageOpen Ao Control (without loading chain/response file). Delete modifier. Error appears: "Number of channels does not correspond to repsonse file" (or something similar).Open Ao Control (without loading chain/response file). Delete modifier. Error appears: "Number of channels does not correspond to repsonse file" (or something similar).v1.0Udo Eisenbarthu.eisenbarth@gsi.deUdo Eisenbarthu.eisenbarth@gsi.dehttps://git.gsi.de/phelix/lv/wombat/-/issues/87Camera Configuration: press Zernike control again2019-04-10T11:51:21ZChristian BrabetzCamera Configuration: press Zernike control againDoesnt go to front if already opend.Doesnt go to front if already opend.v1.0Udo Eisenbarthu.eisenbarth@gsi.deUdo Eisenbarthu.eisenbarth@gsi.dehttps://git.gsi.de/phelix/lv/wombat/-/issues/86WavefrontView / SHS Simulator: Reconstructions depend on sequence of source c...2019-04-10T11:51:21ZChristian BrabetzWavefrontView / SHS Simulator: Reconstructions depend on sequence of source controlsSeems very odd and needs further testing if it is only related to the simulation. It has a huge (!) impact on the reconstructed wavefront with either methode so it seems to be related to the simulation module.
In does matter if first is...Seems very odd and needs further testing if it is only related to the simulation. It has a huge (!) impact on the reconstructed wavefront with either methode so it seems to be related to the simulation module.
In does matter if first is noise is applied (tested with 5-10) and then any zernike abberation (tested with 0,1-0,2, any) or the other way around.
In addition if the noise is reduced to zero again, the wavefront stay at the high, wrong value. Changing the Zernike again is goes down ....v1.0Udo Eisenbarthu.eisenbarth@gsi.deUdo Eisenbarthu.eisenbarth@gsi.dehttps://git.gsi.de/phelix/lv/wombat/-/issues/85SHS Analysis: Display Palette2019-04-10T11:51:21ZChristian BrabetzSHS Analysis: Display PaletteIf a new shs analysis module is started its displaying with the old display palette settings. Even if it comes up with the default value.If a new shs analysis module is started its displaying with the old display palette settings. Even if it comes up with the default value.v1.0Udo Eisenbarthu.eisenbarth@gsi.deUdo Eisenbarthu.eisenbarth@gsi.dehttps://git.gsi.de/phelix/lv/wombat/-/issues/83MLA Alignment Helper: Swtich Data Source2019-01-15T15:09:38ZChristian BrabetzMLA Alignment Helper: Swtich Data SourceDoes work sometimes. But does not update if data source is switched most of the time. Tested with two SimulateSHS.
Seems to update only if going back and forth between both tabs.Does work sometimes. But does not update if data source is switched most of the time. Tested with two SimulateSHS.
Seems to update only if going back and forth between both tabs.v1.0https://git.gsi.de/phelix/lv/wombat/-/issues/82SHS Analysis: dataloop not started in given time -> crash2019-04-23T14:43:17ZUdo Eisenbarthu.eisenbarth@gsi.deSHS Analysis: dataloop not started in given time -> crashOpen camera, SHS Analysis, load ref, save config, Close app. delete ref. Restart Software: SHS Analysis reports missing file and afterwards "dataloop not started within given time" -> complete Crash....Open camera, SHS Analysis, load ref, save config, Close app. delete ref. Restart Software: SHS Analysis reports missing file and afterwards "dataloop not started within given time" -> complete Crash....v1.0https://git.gsi.de/phelix/lv/wombat/-/issues/81SHS Analysis: Errors while working with 12/16 bit images2019-04-16T08:43:45ZUdo Eisenbarthu.eisenbarth@gsi.deSHS Analysis: Errors while working with 12/16 bit imagesIt looks like the threshold of a search rectangle is wrongly calculated. For a 12 bit image all rectangles are considered as valid....It looks like the threshold of a search rectangle is wrongly calculated. For a 12 bit image all rectangles are considered as valid....v1.0Udo Eisenbarthu.eisenbarth@gsi.deUdo Eisenbarthu.eisenbarth@gsi.dehttps://git.gsi.de/phelix/lv/wombat/-/issues/76AnalysisActor: Beamshape GUI: change window title2019-04-10T11:51:21ZUdo Eisenbarthu.eisenbarth@gsi.deAnalysisActor: Beamshape GUI: change window titlev1.0Udo Eisenbarthu.eisenbarth@gsi.deUdo Eisenbarthu.eisenbarth@gsi.dehttps://git.gsi.de/phelix/lv/wombat/-/issues/72Test Autooptimization of static electrodes in situ2019-03-08T09:15:37Zj.b.ohlandTest Autooptimization of static electrodes in situv1.0Udo Eisenbarthu.eisenbarth@gsi.deUdo Eisenbarthu.eisenbarth@gsi.dehttps://git.gsi.de/phelix/lv/wombat/-/issues/69AO Control Error: Number of channels do not match while loading control chain...2019-04-10T11:51:19ZUdo Eisenbarthu.eisenbarth@gsi.deAO Control Error: Number of channels do not match while loading control chain fileReference, control chain file all taken in the same application version.....Reference, control chain file all taken in the same application version.....v1.0https://git.gsi.de/phelix/lv/wombat/-/issues/66"New" command generates crash....2019-04-10T11:51:19ZUdo Eisenbarthu.eisenbarth@gsi.de"New" command generates crash....Open two or more actors. Save as default layout. Press "New" -> crash. The problem here ist that all modules are killed more or less at once. Each closing module ist handled in MainActor:LastAck which publishes a list of open modules. Me...Open two or more actors. Save as default layout. Press "New" -> crash. The problem here ist that all modules are killed more or less at once. Each closing module ist handled in MainActor:LastAck which publishes a list of open modules. Meanwhile tihs list might become invalid....v1.0Udo Eisenbarthu.eisenbarth@gsi.deUdo Eisenbarthu.eisenbarth@gsi.dehttps://git.gsi.de/phelix/lv/wombat/-/issues/65AdatpiveOptics Actor: Remove "Sim Failure" button.2019-04-10T11:51:20ZUdo Eisenbarthu.eisenbarth@gsi.deAdatpiveOptics Actor: Remove "Sim Failure" button.This was only for development and should not got into stable version.This was only for development and should not got into stable version.v1.0Udo Eisenbarthu.eisenbarth@gsi.deUdo Eisenbarthu.eisenbarth@gsi.dehttps://git.gsi.de/phelix/lv/wombat/-/issues/64SHS Analysis: Remove Tilt from Ref does not clear ShiftsAVG array.2019-04-10T11:51:19ZUdo Eisenbarthu.eisenbarth@gsi.deSHS Analysis: Remove Tilt from Ref does not clear ShiftsAVG array.Load Reference, Introduce Tilte in Simulator, Set NrOfAverages >20, Press Ingore Tilt -> Instant reaction in WaveFrontView
Press Remove Tilt -> Slow reaction in Wavefron...Load Reference, Introduce Tilte in Simulator, Set NrOfAverages >20, Press Ingore Tilt -> Instant reaction in WaveFrontView
Press Remove Tilt -> Slow reaction in WavefrontViewv1.0https://git.gsi.de/phelix/lv/wombat/-/issues/63Farfield Reconstructor: Bad Fardfield for small beams2019-04-10T11:51:19Zj.b.ohlandFarfield Reconstructor: Bad Fardfield for small beamsSomehow, border effects seem to appear if the beam is too small / the reference is too big.Somehow, border effects seem to appear if the beam is too small / the reference is too big.v1.0https://git.gsi.de/phelix/lv/wombat/-/issues/62SHS Reference Calibrator: Absolute reference generates tilted wavefront2018-10-29T13:27:05Zj.b.ohlandSHS Reference Calibrator: Absolute reference generates tilted wavefrontv1.0Udo Eisenbarthu.eisenbarth@gsi.deUdo Eisenbarthu.eisenbarth@gsi.dehttps://git.gsi.de/phelix/lv/wombat/-/issues/61Add question whether to overwrite existing ref file in SHS Ref Calibrator2019-04-10T11:51:19ZUdo Eisenbarthu.eisenbarth@gsi.deAdd question whether to overwrite existing ref file in SHS Ref Calibratorv1.0Udo Eisenbarthu.eisenbarth@gsi.deUdo Eisenbarthu.eisenbarth@gsi.dehttps://git.gsi.de/phelix/lv/wombat/-/issues/58AO ControlChainCalibrator: Improve optimization of static electrode2018-10-17T15:44:18Zj.b.ohlandAO ControlChainCalibrator: Improve optimization of static electrodeThe optimization of the static electrodes currently sets the electrodes to zero before applying the new value. This was thought to improve the reliability of the value for actuators with strong hysteresis (e.g. piezo-actuators). However,...The optimization of the static electrodes currently sets the electrodes to zero before applying the new value. This was thought to improve the reliability of the value for actuators with strong hysteresis (e.g. piezo-actuators). However, it seems to result in oscillating values around the optimum with bad convergence. Therefore, this zero-setting should be removed. It is also unnecessary for actuators with little hysteresis.v1.0https://git.gsi.de/phelix/lv/wombat/-/issues/57WavefrontView Actor: Remove/Disable or fix unfunctional SHS Reconstructors2019-04-10T11:51:19Zj.b.ohlandWavefrontView Actor: Remove/Disable or fix unfunctional SHS ReconstructorsIn a stable version, only working reconstructors should be selectable. Right now, those are only the Southwell and the Harker O'Leary reconstructors.
A modal reconstructor (Zernike) would be nice, but this would be a separate thing (see...In a stable version, only working reconstructors should be selectable. Right now, those are only the Southwell and the Harker O'Leary reconstructors.
A modal reconstructor (Zernike) would be nice, but this would be a separate thing (see #25).v1.0https://git.gsi.de/phelix/lv/wombat/-/issues/53AO Actor: Invalid name-changing causes actor to crash2019-04-10T11:51:19Zj.b.ohlandAO Actor: Invalid name-changing causes actor to crash1: Open Simple Ctl Actor
2: (Dummy Driver is selected) Change the device name
3: Actor crashes with error message: "Error 1373 occured at Get LV Class Default Value By Name.vi Possible reasons(s): LabVIEW: Class could not be loaded."
Ge...1: Open Simple Ctl Actor
2: (Dummy Driver is selected) Change the device name
3: Actor crashes with error message: "Error 1373 occured at Get LV Class Default Value By Name.vi Possible reasons(s): LabVIEW: Class could not be loaded."
Generally, the selection of the driver should not cause the actor to crash. A simple boolean LED saying: "Device found" could indicate the success. The settings are not changed until the Driver and the device name result in a valid connection.v1.0