Automatic electrode-disabling in control-matrix
Auto-detect wherever an electrode of a dm is outside of the beam or not
-> This could happen during the calculation of the response-matrix
-> In this case, some noise-samples of the wavefront should be delivered with the responses
-> Using the valid points of the currently recorded wavefront, it can be determined if one electrodes influence is much bigger than the noise on the wavefront or not
-> An electrode-mapping should be delivered with the calculated response-matrix, telling which voltage-vector-component corresponds to which physical electrode
Actual disabling of electrodes (e.g. unused ones) should happen manually during the setup of the adaptive group.