replay-single.sh

#!/bin/sh

set -e

#
# This test needs to be run on the client
#

LUSTRE=${LUSTRE:-`dirname $0`/..}
. $LUSTRE/tests/test-framework.sh

init_test_env $@

. ${CONFIG:=$LUSTRE/tests/cfg/lmv.sh}

build_test_filter

assert_env MDSCOUNT

# Skip these tests
ALWAYS_EXCEPT=""

gen_config() {
    rm -f $XMLCONFIG

    if [ "$MDSCOUNT" -gt 1 ]; then
        add_lmv lmv1
        for mds in `mds_list`; do
            MDSDEV=$TMP/${mds}-`hostname`
            add_mds $mds --dev $MDSDEV --size $MDSSIZE --lmv lmv1
        done
	MDS=lmv1
        add_lov_to_lmv lov1 lmv1 --stripe_sz $STRIPE_BYTES \
	    --stripe_cnt $STRIPES_PER_OBJ --stripe_pattern 0
    else
        add_mds mds1 --dev $MDSDEV --size $MDSSIZE
        if [ ! -z "$mds1failover_HOST" ]; then
	     add_mdsfailover mds1 --dev $MDSDEV --size $MDSSIZE
        fi
	add_lov lov1 mds1 --stripe_sz $STRIPE_BYTES \
	    --stripe_cnt $STRIPES_PER_OBJ --stripe_pattern 0
	MDS=mds1_svc
    fi
    
    add_ost ost --lov lov1 --dev $OSTDEV --size $OSTSIZE
    add_ost ost2 --lov lov1 --dev ${OSTDEV}-2 --size $OSTSIZE
    add_client client --mds $MDS --lov lov1 --path $MOUNT

}

build_test_filter

cleanup() {
    # make sure we are using the primary MDS, so the config log will
    # be able to clean up properly.
    activemds=`facet_active mds1`
    if [ $activemds != "mds1" ]; then
        fail mds1
    fi
    zconf_umount `hostname` $MOUNT
    for mds in `mds_list`; do
	stop $mds ${FORCE} $MDSLCONFARGS
    done
    stop ost2 ${FORCE} --dump cleanup.log
    stop ost ${FORCE} --dump cleanup.log
}

if [ "$ONLY" == "cleanup" ]; then
    sysctl -w portals.debug=0 || true
    cleanup
    exit
fi

SETUP=${SETUP:-"setup"}
CLEANUP=${CLEANUP:-"cleanup"}

setup() {
    gen_config

    start ost --reformat $OSTLCONFARGS 
    start ost2 --reformat $OSTLCONFARGS 
    [ "$DAEMONFILE" ] && $LCTL debug_daemon start $DAEMONFILE $DAEMONSIZE
    for mds in `mds_list`; do
	start $mds --reformat $MDSLCONFARGS
    done
    grep " $MOUNT " /proc/mounts || zconf_mount `hostname` $MOUNT
}

$SETUP

if [ "$ONLY" == "setup" ]; then
    exit 0
fi

mkdir -p $DIR

test_0() {
    replay_barrier mds1
    fail mds1
}
run_test 0 "empty replay"

test_0b() {
    # this test attempts to trigger a race in the precreation code, 
    # and must run before any other objects are created on the filesystem
    fail ost
    createmany -o $DIR/$tfile 20 || return 1
    unlinkmany $DIR/$tfile 20 || return 2
}
run_test 0b "ensure object created after recover exists. (3284)"

test_1() {
    replay_barrier mds1
    mcreate $DIR/$tfile
    fail mds1
    $CHECKSTAT -t file $DIR/$tfile || return 1
    rm $DIR/$tfile
}
run_test 1 "simple create"

test_2a() {
    replay_barrier mds1
    touch $DIR/$tfile
    fail mds1
    $CHECKSTAT -t file $DIR/$tfile || return 1
    rm $DIR/$tfile
}
run_test 2a "touch"

test_2b() {
    ./mcreate $DIR/$tfile
    replay_barrier mds1
    touch $DIR/$tfile
    fail mds1
    $CHECKSTAT -t file $DIR/$tfile || return 1
    rm $DIR/$tfile
}
run_test 2b "touch"

test_3a() {
    replay_barrier mds1
    mcreate $DIR/$tfile
    o_directory $DIR/$tfile
    fail mds1
    $CHECKSTAT -t file $DIR/$tfile || return 2
    rm $DIR/$tfile
}
run_test 3a "replay failed open(O_DIRECTORY)"

test_3b() {
    replay_barrier mds1
#define OBD_FAIL_MDS_OPEN_PACK | OBD_FAIL_ONCE
    do_facet mds "sysctl -w lustre.fail_loc=0x80000114"
    touch $DIR/$tfile
    do_facet mds "sysctl -w lustre.fail_loc=0"
    fail mds1
    $CHECKSTAT -t file $DIR/$tfile && return 2
    return 0
}
run_test 3b "replay failed open -ENOMEM"

test_3c() {
    replay_barrier mds1
#define OBD_FAIL_MDS_ALLOC_OBDO | OBD_FAIL_ONCE
    do_facet mds "sysctl -w lustre.fail_loc=0x80000128"
    touch $DIR/$tfile
    do_facet mds "sysctl -w lustre.fail_loc=0"
    fail mds1

    $CHECKSTAT -t file $DIR/$tfile && return 2
    return 0
}
run_test 3c "replay failed open -ENOMEM"

test_4() {
    replay_barrier mds1
    for i in `seq 10`; do
        echo "tag-$i" > $DIR/$tfile-$i
    done 
    fail mds1
    for i in `seq 10`; do
      grep -q "tag-$i" $DIR/$tfile-$i || error "$tfile-$i"
    done 
}
run_test 4 "|x| 10 open(O_CREAT)s"

test_4b() {
    replay_barrier mds1
    rm -rf $DIR/$tfile-*
    fail mds1
    $CHECKSTAT -t file $DIR/$tfile-* && return 1 || true
}
run_test 4b "|x| rm 10 files"

# The idea is to get past the first block of precreated files on both 
# osts, and then replay.
test_5() {
    replay_barrier mds1
    for i in `seq 220`; do
        echo "tag-$i" > $DIR/$tfile-$i
    done 
    fail mds1
    for i in `seq 220`; do
      grep -q "tag-$i" $DIR/$tfile-$i || error "f1c-$i"
    done 
    rm -rf $DIR/$tfile-*
    sleep 3
    # waiting for commitment of removal
}
run_test 5 "|x| 220 open(O_CREAT)"


test_6() {
    replay_barrier mds1
    mkdir $DIR/$tdir
    mcreate $DIR/$tdir/$tfile
    fail mds1
    $CHECKSTAT -t dir $DIR/$tdir || return 1
    $CHECKSTAT -t file $DIR/$tdir/$tfile || return 2
    sleep 2
    # waiting for log process thread
}
run_test 6 "mkdir + contained create"

test_6b() {
    replay_barrier mds1
    rm -rf $DIR/$tdir
    fail mds1
    $CHECKSTAT -t dir $DIR/$tdir && return 1 || true 
}
run_test 6b "|X| rmdir"

test_7() {
    mkdir $DIR/$tdir
    replay_barrier mds1
    mcreate $DIR/$tdir/$tfile
    fail mds1
    $CHECKSTAT -t dir $DIR/$tdir || return 1
    $CHECKSTAT -t file $DIR/$tdir/$tfile || return 2
    rm -fr $DIR/$tdir
}
run_test 7 "mkdir |X| contained create"

test_8() {
    replay_barrier mds1
    multiop $DIR/$tfile mo_c &
    MULTIPID=$!
    sleep 1
    fail mds1
    ls $DIR/$tfile
    $CHECKSTAT -t file $DIR/$tfile || return 1
    kill -USR1 $MULTIPID || return 2
    wait $MULTIPID || return 3
    rm $DIR/$tfile
}
run_test 8 "creat open |X| close"

test_9() {
    replay_barrier mds1
    mcreate $DIR/$tfile
    local old_inum=`ls -i $DIR/$tfile | awk '{print $1}'`
    fail mds1
    local new_inum=`ls -i $DIR/$tfile | awk '{print $1}'`

    echo " old_inum == $old_inum, new_inum == $new_inum"
    if [ $old_inum -eq $new_inum  ] ;
    then
        echo " old_inum and new_inum match"
    else
        echo "!!!! old_inum and new_inum NOT match"
        return 1
    fi
    rm $DIR/$tfile
}
run_test 9  "|X| create (same inum/gen)"

test_10() {
    mcreate $DIR/$tfile
    replay_barrier mds1
    mv $DIR/$tfile $DIR/$tfile-2
    rm -f $DIR/$tfile
    fail mds1
    $CHECKSTAT $DIR/$tfile && return 1
    $CHECKSTAT $DIR/$tfile-2 ||return 2
    rm $DIR/$tfile-2
    return 0
}
run_test 10 "create |X| rename unlink"

test_11() {
    mcreate $DIR/$tfile
    echo "old" > $DIR/$tfile
    mv $DIR/$tfile $DIR/$tfile-2
    replay_barrier mds1
    echo "new" > $DIR/$tfile
    grep new $DIR/$tfile 
    grep old $DIR/$tfile-2
    fail mds1
    grep new $DIR/$tfile || return 1
    grep old $DIR/$tfile-2 || return 2
}
run_test 11 "create open write rename |X| create-old-name read"

test_12() {
    mcreate $DIR/$tfile 
    multiop $DIR/$tfile o_tSc &
    pid=$!
    # give multiop a chance to open
    sleep 1
    rm -f $DIR/$tfile
    replay_barrier mds1
    kill -USR1 $pid
    wait $pid || return 1

    fail mds1
    [ -e $DIR/$tfile ] && return 2
    return 0
}
run_test 12 "open, unlink |X| close"


# 1777 - replay open after committed chmod that would make
#        a regular open a failure    
test_13() {
    mcreate $DIR/$tfile 
    multiop $DIR/$tfile O_wc &
    pid=$!
    # give multiop a chance to open
    sleep 1 
    chmod 0 $DIR/$tfile
    $CHECKSTAT -p 0 $DIR/$tfile
    replay_barrier mds1
    fail mds1
    kill -USR1 $pid
    wait $pid || return 1

    $CHECKSTAT -s 1 -p 0 $DIR/$tfile || return 2
    return 0
}
run_test 13 "open chmod 0 |x| write close"

test_14() {
    multiop $DIR/$tfile O_tSc &
    pid=$!
    # give multiop a chance to open
    sleep 1 
    rm -f $DIR/$tfile
    replay_barrier mds1
    kill -USR1 $pid || return 1
    wait $pid || return 2

    fail mds1
    [ -e $DIR/$tfile ] && return 3
    return 0
}
run_test 14 "open(O_CREAT), unlink |X| close"

test_15() {
    multiop $DIR/$tfile O_tSc &
    pid=$!
    # give multiop a chance to open
    sleep 1 
    rm -f $DIR/$tfile
    replay_barrier mds1
    touch $DIR/g11 || return 1
    kill -USR1 $pid
    wait $pid || return 2

    fail mds1
    [ -e $DIR/$tfile ] && return 3
    touch $DIR/h11 || return 4
    return 0
}
run_test 15 "open(O_CREAT), unlink |X|  touch new, close"


test_16() {
    replay_barrier mds1
    mcreate $DIR/$tfile
    munlink $DIR/$tfile
    mcreate $DIR/$tfile-2
    fail mds1
    [ -e $DIR/$tfile ] && return 1
    [ -e $DIR/$tfile-2 ] || return 2
    munlink $DIR/$tfile-2 || return 3
}
run_test 16 "|X| open(O_CREAT), unlink, touch new,  unlink new"

test_17() {
    replay_barrier mds1
    multiop $DIR/$tfile O_c &
    pid=$!
    # give multiop a chance to open
    sleep 1 
    fail mds1
    kill -USR1 $pid || return 1
    wait $pid || return 2
    $CHECKSTAT -t file $DIR/$tfile || return 3
    rm $DIR/$tfile
}
run_test 17 "|X| open(O_CREAT), |replay| close"

test_18() {
    replay_barrier mds1
    multiop $DIR/$tfile O_tSc &
    pid=$!
    # give multiop a chance to open
    sleep 1 
    rm -f $DIR/$tfile
    touch $DIR/$tfile-2 || return 1
    echo "pid: $pid will close"
    kill -USR1 $pid
    wait $pid || return 2

    fail mds1
    [ -e $DIR/$tfile ] && return 3
    [ -e $DIR/$tfile-2 ] || return 4
    # this touch frequently fails
    touch $DIR/$tfile-3 || return 5
    munlink $DIR/$tfile-2 || return 6
    munlink $DIR/$tfile-3 || return 7
    return 0
}
run_test 18 "|X| open(O_CREAT), unlink, touch new, close, touch, unlink"

# bug 1855 (a simpler form of test_11 above)
test_19() {
    replay_barrier mds1
    mcreate $DIR/$tfile
    echo "old" > $DIR/$tfile
    mv $DIR/$tfile $DIR/$tfile-2
    grep old $DIR/$tfile-2
    fail mds1
    grep old $DIR/$tfile-2 || return 2
}
run_test 19 "|X| mcreate, open, write, rename "

test_20() {
    replay_barrier mds1
    multiop $DIR/$tfile O_tSc &
    pid=$!
    # give multiop a chance to open
    sleep 1 
    rm -f $DIR/$tfile

    fail mds1
    kill -USR1 $pid
    wait $pid || return 1
    [ -e $DIR/$tfile ] && return 2
    return 0
}
run_test 20 "|X| open(O_CREAT), unlink, replay, close (test mds_cleanup_orphans)"

test_21() {
    replay_barrier mds1
    multiop $DIR/$tfile O_tSc &
    pid=$!
    # give multiop a chance to open
    sleep 1 
    rm -f $DIR/$tfile
    touch $DIR/g11 || return 1

    fail mds1
    kill -USR1 $pid
    wait $pid || return 2
    [ -e $DIR/$tfile ] && return 3
    touch $DIR/h11 || return 4
    return 0
}
run_test 21 "|X| open(O_CREAT), unlink touch new, replay, close (test mds_cleanup_orphans)"

test_22() {
    multiop $DIR/$tfile O_tSc &
    pid=$!
    # give multiop a chance to open
    sleep 1 

    replay_barrier mds1
    rm -f $DIR/$tfile

    fail mds1
    kill -USR1 $pid
    wait $pid || return 1
    [ -e $DIR/$tfile ] && return 2
    return 0
}
run_test 22 "open(O_CREAT), |X| unlink, replay, close (test mds_cleanup_orphans)"

test_23() {
    multiop $DIR/$tfile O_tSc &
    pid=$!
    # give multiop a chance to open
    sleep 1 

    replay_barrier mds1
    rm -f $DIR/$tfile
    touch $DIR/g11 || return 1

    fail mds1
    kill -USR1 $pid
    wait $pid || return 2
    [ -e $DIR/$tfile ] && return 3
    touch $DIR/h11 || return 4
    return 0
}
run_test 23 "open(O_CREAT), |X| unlink touch new, replay, close (test mds_cleanup_orphans)"

test_24() {
    multiop $DIR/$tfile O_tSc &
    pid=$!
    # give multiop a chance to open
    sleep 1 

    replay_barrier mds1
    fail mds1
    rm -f $DIR/$tfile
    kill -USR1 $pid
    wait $pid || return 1
    [ -e $DIR/$tfile ] && return 2
    return 0
}
run_test 24 "open(O_CREAT), replay, unlink, close (test mds_cleanup_orphans)"

test_25() {
    multiop $DIR/$tfile O_tSc &
    pid=$!
    # give multiop a chance to open
    sleep 1 
    rm -f $DIR/$tfile

    replay_barrier mds1
    fail mds1
    kill -USR1 $pid
    wait $pid || return 1
    [ -e $DIR/$tfile ] && return 2
    return 0
}
run_test 25 "open(O_CREAT), unlink, replay, close (test mds_cleanup_orphans)"

test_26() {
    replay_barrier mds1
    multiop $DIR/$tfile-1 O_tSc &
    pid1=$!
    multiop $DIR/$tfile-2 O_tSc &
    pid2=$!
    # give multiop a chance to open
    sleep 1 
    rm -f $DIR/$tfile-1
    rm -f $DIR/$tfile-2
    kill -USR1 $pid2
    wait $pid2 || return 1

    fail mds1
    kill -USR1 $pid1
    wait $pid1 || return 2
    [ -e $DIR/$tfile-1 ] && return 3
    [ -e $DIR/$tfile-2 ] && return 4
    return 0
}
run_test 26 "|X| open(O_CREAT), unlink two, close one, replay, close one (test mds_cleanup_orphans)"

test_27() {
    replay_barrier mds1
    multiop $DIR/$tfile-1 O_tSc &
    pid1=$!
    multiop $DIR/$tfile-2 O_tSc &
    pid2=$!
    # give multiop a chance to open
    sleep 1 
    rm -f $DIR/$tfile-1
    rm -f $DIR/$tfile-2

    fail mds1
    kill -USR1 $pid1
    wait $pid1 || return 1
    kill -USR1 $pid2
    wait $pid2 || return 2
    [ -e $DIR/$tfile-1 ] && return 3
    [ -e $DIR/$tfile-2 ] && return 4
    return 0
}
run_test 27 "|X| open(O_CREAT), unlink two, replay, close two (test mds_cleanup_orphans)"

test_28() {
    multiop $DIR/$tfile-1 O_tSc &
    pid1=$!
    multiop $DIR/$tfile-2 O_tSc &
    pid2=$!
    # give multiop a chance to open
    sleep 1 
    replay_barrier mds1
    rm -f $DIR/$tfile-1
    rm -f $DIR/$tfile-2
    kill -USR1 $pid2
    wait $pid2 || return 1

    fail mds1
    kill -USR1 $pid1
    wait $pid1 || return 2
    [ -e $DIR/$tfile-1 ] && return 3
    [ -e $DIR/$tfile-2 ] && return 4
    return 0
}
run_test 28 "open(O_CREAT), |X| unlink two, close one, replay, close one (test mds_cleanup_orphans)"

test_29() {
    multiop $DIR/$tfile-1 O_tSc &
    pid1=$!
    multiop $DIR/$tfile-2 O_tSc &
    pid2=$!
    # give multiop a chance to open
    sleep 1 
    replay_barrier mds1
    rm -f $DIR/$tfile-1
    rm -f $DIR/$tfile-2

    fail mds1
    kill -USR1 $pid1
    wait $pid1 || return 1
    kill -USR1 $pid2
    wait $pid2 || return 2
    [ -e $DIR/$tfile-1 ] && return 3
    [ -e $DIR/$tfile-2 ] && return 4
    return 0
}
run_test 29 "open(O_CREAT), |X| unlink two, replay, close two (test mds_cleanup_orphans)"

test_30() {
    multiop $DIR/$tfile-1 O_tSc &
    pid1=$!
    multiop $DIR/$tfile-2 O_tSc &
    pid2=$!
    # give multiop a chance to open
    sleep 1 
    rm -f $DIR/$tfile-1
    rm -f $DIR/$tfile-2

    replay_barrier mds1
    fail mds1
    kill -USR1 $pid1
    wait $pid1 || return 1
    kill -USR1 $pid2
    wait $pid2 || return 2
    [ -e $DIR/$tfile-1 ] && return 3
    [ -e $DIR/$tfile-2 ] && return 4
    return 0
}
run_test 30 "open(O_CREAT) two, unlink two, replay, close two (test mds_cleanup_orphans)"

test_31() {
    multiop $DIR/$tfile-1 O_tSc &
    pid1=$!
    multiop $DIR/$tfile-2 O_tSc &
    pid2=$!
    # give multiop a chance to open
    sleep 1 
    rm -f $DIR/$tfile-1

    replay_barrier mds1
    rm -f $DIR/$tfile-2
    fail mds1
    kill -USR1 $pid1
    wait $pid1 || return 1
    kill -USR1 $pid2
    wait $pid2 || return 2
    [ -e $DIR/$tfile-1 ] && return 3
    [ -e $DIR/$tfile-2 ] && return 4
    return 0
}
run_test 31 "open(O_CREAT) two, unlink one, |X| unlink one, close two (test mds_cleanup_orphans)"

# tests for bug 2104; completion without crashing is success.  The close is
# stale, but we always return 0 for close, so the app never sees it.
test_32() {
    multiop $DIR/$tfile O_c &
    pid1=$!
    multiop $DIR/$tfile O_c &
    pid2=$!
    # give multiop a chance to open
    sleep 1
    mds_evict_client
    df $MOUNT || df $MOUNT || return 1
    kill -USR1 $pid1
    kill -USR1 $pid2
    sleep 1
    return 0
}
run_test 32 "close() notices client eviction; close() after client eviction"

# Abort recovery before client complete
test_33() {
    replay_barrier mds1
    touch $DIR/$tfile
    fail_abort mds1
    # this file should be gone, because the replay was aborted
    $CHECKSTAT -t file $DIR/$tfile && return 1
    return 0
}
run_test 33 "abort recovery before client does replay"

test_34() {
    multiop $DIR/$tfile O_c &
    pid=$!
    # give multiop a chance to open
    sleep 1 
    rm -f $DIR/$tfile

    replay_barrier mds1
    fail_abort mds1
    kill -USR1 $pid
    [ -e $DIR/$tfile ] && return 1
    sync
    return 0
}
run_test 34 "abort recovery before client does replay (test mds_cleanup_orphans)"

# bug 2278 - generate one orphan on OST, then destroy it during recovery from llog 
test_35() {
    touch $DIR/$tfile

#define OBD_FAIL_MDS_REINT_NET_REP       0x119
    do_facet mds "sysctl -w lustre.fail_loc=0x80000119"
    rm -f $DIR/$tfile &
    sleep 1
    sync
    sleep 1
    # give a chance to remove from MDS
    fail_abort mds1
    $CHECKSTAT -t file $DIR/$tfile && return 1 || true
}
run_test 35 "test recovery from llog for unlink op"

# b=2432 resent cancel after replay uses wrong cookie,
# so don't resend cancels
test_36() {
    replay_barrier mds1
    touch $DIR/$tfile
    checkstat $DIR/$tfile
    facet_failover mds1
    cancel_lru_locks MDC
    if dmesg | grep "unknown lock cookie"; then 
	echo "cancel after replay failed"
	return 1
    fi
}
run_test 36 "don't resend cancel"

# b=2368
# directory orphans can't be unlinked from PENDING directory
test_37() {
    rmdir $DIR/$tfile 2>/dev/null
    multiop $DIR/$tfile dD_c &
    pid=$!
    # give multiop a chance to open
    sleep 1 
    rmdir $DIR/$tfile

    replay_barrier mds1
    # clear the dmesg buffer so we only see errors from this recovery
    dmesg -c >/dev/null
    fail_abort mds1
    kill -USR1 $pid
    dmesg | grep  "mds_unlink_orphan.*error .* unlinking orphan" && return 1
    sync
    return 0
}
run_test 37 "abort recovery before client does replay (test mds_cleanup_orphans for directories)"

test_38() {
    createmany -o $DIR/$tfile-%d 800
    unlinkmany $DIR/$tfile-%d 0 400
    replay_barrier mds1
    fail mds1
    unlinkmany $DIR/$tfile-%d 400 400
    sleep 2
    $CHECKSTAT -t file $DIR/$tfile-* && return 1 || true
}
run_test 38 "test recovery from unlink llog (test llog_gen_rec) "

test_39() {
    createmany -o $DIR/$tfile-%d 800
    replay_barrier mds1
    unlinkmany $DIR/$tfile-%d 0 400
    fail mds1
    unlinkmany $DIR/$tfile-%d 400 400
    sleep 2
    $CHECKSTAT -t file $DIR/$tfile-* && return 1 || true
}
run_test 39 "test recovery from unlink llog (test llog_gen_rec) "

count_ost_writes() {
        cat /proc/fs/lustre/osc/*/stats |
            awk -vwrites=0 '/ost_write/ { writes += $2 } END { print writes; }'
}

#b=2477,2532
test_40(){
    $LCTL mark multiop $MOUNT/$tfile OS_c 
    multiop $MOUNT/$tfile OS_c  &
    PID=$!
    writeme -s $MOUNT/${tfile}-2 &
    WRITE_PID=$!
    sleep 1
    facet_failover mds1
#define OBD_FAIL_MDS_CONNECT_NET         0x117
    do_facet mds "sysctl -w lustre.fail_loc=0x80000117"
    kill -USR1 $PID
    stat1=`count_ost_writes`
    sleep $TIMEOUT
    stat2=`count_ost_writes`
    echo "$stat1, $stat2"
    if [ $stat1 -lt $stat2 ]; then 
       echo "writes continuing during recovery"
       RC=0
    else
       echo "writes not continuing during recovery, bug 2477"
       RC=4
    fi
    echo "waiting for writeme $WRITE_PID"
    kill $WRITE_PID
    wait $WRITE_PID 

    echo "waiting for multiop $PID"
    wait $PID || return 2
    do_facet client munlink $MOUNT/$tfile  || return 3
    do_facet client munlink $MOUNT/${tfile}-2  || return 3
    return $RC
}
run_test 40 "cause recovery in ptlrpc, ensure IO continues"


#b=2814
# make sure that a read to one osc doesn't try to double-unlock its page just
# because another osc is invalid.  trigger_group_io used to mistakenly return
# an error if any oscs were invalid even after having successfully put rpcs
# on valid oscs.  This was fatal if the caller was ll_readpage who unlocked
# the page, guarnateeing that the unlock from the RPC completion would
# assert on trying to unlock the unlocked page.
test_41() {
    local f=$MOUNT/$tfile
    # make sure the start of the file is ost1
    lfs setstripe $f $((128 * 1024)) 0 0 
    do_facet client dd if=/dev/zero of=$f bs=4k count=1 || return 3
    cancel_lru_locks OSC
    # fail ost2 and read from ost1
    local osc2_dev=`$LCTL device_list | \
		awk '(/ost2.*client_facet/){print $4}' `
    $LCTL --device %$osc2_dev deactivate
    do_facet client dd if=$f of=/dev/null bs=4k count=1 || return 3
    $LCTL --device %$osc2_dev activate
    return 0
}
run_test 41 "read from a valid osc while other oscs are invalid"

# test MDS recovery after ost failure
test_42() {
    blocks=`df $MOUNT | tail -n 1 | awk '{ print $1 }'`
    createmany -o $DIR/$tfile-%d 800
    replay_barrier ost
    unlinkmany $DIR/$tfile-%d 0 400
    facet_failover ost
    
    # osc is evicted, fs is smaller
    blocks_after=`df $MOUNT | tail -n 1 | awk '{ print $1 }'`
    [ $blocks_after -lt $blocks ] || return 1
    echo wait for MDS to timeout and recover
    sleep $((TIMEOUT * 2))
    unlinkmany $DIR/$tfile-%d 400 400
    $CHECKSTAT -t file $DIR/$tfile-* && return 2 || true
}
run_test 42 "recovery after ost failure"

# b=2530
# timeout in MDS/OST recovery RPC will LBUG MDS
test_43() {
    replay_barrier mds1

    # OBD_FAIL_OST_CREATE_NET 0x204
    do_facet ost "sysctl -w lustre.fail_loc=0x80000204"
    facet_failover mds1
    df $MOUNT || return 1
    sleep 10
    do_facet ost "sysctl -w lustre.fail_loc=0"

    return 0
}
run_test 43 "mds osc import failure during recovery; don't LBUG"

test_44() {
    mdcdev=`awk '/mds_svc_MNT/ {print $1}' < /proc/fs/lustre/devices`
    do_facet mds "sysctl -w lustre.fail_loc=0x80000701"
    $LCTL --device $mdcdev recover
    df $MOUNT
    do_facet mds "sysctl -w lustre.fail_loc=0"
    return 0
}
run_test 44 "race in target handle connect"

# Handle failed close
test_45() {
    mdcdev=`awk '/mds_svc_MNT/ {print $1}' < /proc/fs/lustre/devices`
    $LCTL --device $mdcdev recover

    multiop $DIR/$tfile O_c &
    pid=$!
    sleep 1

    # This will cause the CLOSE to fail before even 
    # allocating a reply buffer
    $LCTL --device $mdcdev deactivate

    # try the close
    kill -USR1 $pid
    wait $pid || return 1

    $LCTL --device $mdcdev activate

    $CHECKSTAT -t file $DIR/$tfile || return 2
    return 0
}
run_test 45 "Handle failed close"

test_46() {
    dmesg -c >/dev/null
    drop_reply "touch $DIR/$tfile"
    fail mds1
    # ironically, the previous test, 45, will cause a real forced close,
    # so just look for one for this test
    dmesg | grep -i "force closing client file handle for $tfile" && return 1
    return 0
}
run_test 46 "Don't leak file handle after open resend (3325)"

# b=2824
test_47() {

    # create some files to make sure precreate has been done on all 
    # OSTs. (just in case this test is run independently)
    createmany -o $DIR/$tfile 20  || return 1

    # OBD_FAIL_OST_CREATE_NET 0x204
    fail ost
    do_facet ost "sysctl -w lustre.fail_loc=0x80000204"
    df $MOUNT || return 2

    # let the MDS discover the OST failure, attempt to recover, fail
    # and recover again.  
    sleep $((3 * TIMEOUT))

    # Without 2824, this createmany would hang 
    createmany -o $DIR/$tfile 20 || return 3
    unlinkmany $DIR/$tfile 20 || return 4

    do_facet ost "sysctl -w lustre.fail_loc=0"
    return 0
}
run_test 47 "MDS->OSC failure during precreate cleanup (2824)"


test_48() {
    createmany -o $DIR/${tfile}- 100
    $CHECKSTAT $DIR/${tfile}-99 || return 1
    mds_evict_client
    df $MOUNT || df $MOUNT || return 2
    sleep 1
    $CHECKSTAT $DIR/${tfile}-99 || return 3

    dmesg -c >/dev/null
    replay_barrier mds1
    fail mds1
    unlinkmany $DIR/${tfile}- 100 || return 4
    if dmesg | grep "back in time"; then 
	echo "server went back in time!"
	return 5
    fi
    return 0
}
run_test 48 "Don't lose transno when client is evicted (2525)"

equals_msg test complete, cleaning up
$CLEANUP