b=3405

update replay-dual.sh and replay-ost-single.sh

lustre/tests/replay-dual.sh

@@ -7,20 +7,30 @@ LUSTRE=${LUSTRE:-`dirname $0`/..}
 
 init_test_env $@
 
-. ${CONFIG:=$LUSTRE/tests/cfg/local.sh}
+. ${CONFIG:=$LUSTRE/tests/cfg/lmv.sh}
 
 gen_config() {
     rm -f $XMLCONFIG
-    add_mds mds --dev $MDSDEV --size $MDSSIZE
-    if [ ! -z "$mdsfailover_HOST" ]; then
-	 add_mdsfailover mds --dev $MDSDEV --size $MDSSIZE
+    if [ "$MDSCOUNT" -gt 1 ]; then
+        add_lmv lmv1
+        for mds in `mds_list`; do
+            MDSDEV=$TMP/${mds}-`hostname`
+            add_mds $mds --dev $MDSDEV --size $MDSSIZE  --lmv lmv1
+        done
+        add_lov_to_lmv lov1 lmv1 --stripe_sz $STRIPE_BYTES \
+	    --stripe_cnt $STRIPES_PER_OBJ --stripe_pattern 0
+	MDS=lmv1
+    else
+        add_mds mds1 --dev $MDSDEV --size $MDSSIZE
+        add_lov lov1 mds1 --stripe_sz $STRIPE_BYTES \
+	    --stripe_cnt $STRIPES_PER_OBJ --stripe_pattern 0
+	MDS=mds1_svc
+
     fi
-    
-    add_lov lov1 mds --stripe_sz $STRIPE_BYTES \
-	--stripe_cnt $STRIPES_PER_OBJ --stripe_pattern 0
+
     add_ost ost --lov lov1 --dev $OSTDEV --size $OSTSIZE
     add_ost ost2 --lov lov1 --dev ${OSTDEV}-2 --size $OSTSIZE
-    add_client client mds --lov lov1 --path $MOUNT
+    add_client client --mds ${MDS} --lov lov1 --path $MOUNT
 }
 
 
@@ -30,15 +40,17 @@ build_test_filter
 cleanup() {
     # make sure we are using the primary MDS, so the config log will
     # be able to clean up properly.
-    activemds=`facet_active mds`
-    if [ $activemds != "mds" ]; then
-        fail mds
+    activemds=`facet_active mds1`
+    if [ $activemds != "mds1" ]; then
+        fail mds1
     fi
 
     umount $MOUNT2 || true
     umount $MOUNT || true
     rmmod llite
-    stop mds ${FORCE}
+    for mds in `mds_list`; do
+	stop $mds ${FORCE} $MDSLCONFARGS
+    done
     stop ost2 ${FORCE}
     stop ost ${FORCE}  --dump cleanup-dual.log
 }
@@ -55,13 +67,15 @@ PINGER=`cat /proc/fs/lustre/pinger`
 
 if [ "$PINGER" != "on" ]; then
     echo "ERROR: Lustre must be built with --enable-pinger for replay-dual"
-    stop mds
+    stop ost
     exit 1
 fi
 
 start ost2 --reformat $OSTLCONFARGS 
 [ "$DAEMONFILE" ] && $LCTL debug_daemon start $DAEMONFILE $DAEMONSIZE
-start mds $MDSLCONFARGS --reformat
+for mds in `mds_list`; do
+    start $mds --reformat $MDSLCONFARGS
+done
 grep " $MOUNT " /proc/mounts || zconf_mount `hostname` $MOUNT
 grep " $MOUNT2 " /proc/mounts || zconf_mount `hostname` $MOUNT2
 
@@ -72,10 +86,10 @@ echo $UPCALL > /proc/sys/lustre/upcall
 
 test_1() {
     touch $MOUNT1/a
-    replay_barrier mds
+    replay_barrier mds1
     touch $MOUNT2/b
 
-    fail mds
+    fail mds1
     checkstat $MOUNT2/a || return 1
     checkstat $MOUNT1/b || return 2
     rm $MOUNT2/a $MOUNT1/b
@@ -88,10 +102,10 @@ run_test 1 "|X| simple create"
 
 
 test_2() {
-    replay_barrier mds
+    replay_barrier mds1
     mkdir $MOUNT1/adir
 
-    fail mds
+    fail mds1
     checkstat $MOUNT2/adir || return 1
     rmdir $MOUNT2/adir
     checkstat $MOUNT2/adir && return 2
@@ -101,11 +115,11 @@ test_2() {
 run_test 2 "|X| mkdir adir"
 
 test_3() {
-    replay_barrier mds
+    replay_barrier mds1
     mkdir $MOUNT1/adir
     mkdir $MOUNT2/adir/bdir
 
-    fail mds
+    fail mds1
     checkstat $MOUNT2/adir      || return 1
     checkstat $MOUNT1/adir/bdir || return 2
     rmdir $MOUNT2/adir/bdir $MOUNT1/adir
@@ -118,11 +132,11 @@ run_test 3 "|X| mkdir adir, mkdir adir/bdir "
 
 test_4() {
     mkdir $MOUNT1/adir
-    replay_barrier mds
+    replay_barrier mds1
     mkdir $MOUNT1/adir  && return 1
     mkdir $MOUNT2/adir/bdir
 
-    fail mds
+    fail mds1
     checkstat $MOUNT2/adir      || return 2
     checkstat $MOUNT1/adir/bdir || return 3
 
@@ -143,11 +157,11 @@ test_5() {
     # give multiop a chance to open
     sleep 1 
     rm -f $MOUNT1/a
-    replay_barrier mds
+    replay_barrier mds1
     kill -USR1 $pid
     wait $pid || return 1
 
-    fail mds
+    fail mds1
     [ -e $MOUNT2/a ] && return 2
     return 0
 }
@@ -163,11 +177,11 @@ test_6() {
     # give multiop a chance to open
     sleep 1 
     rm -f $MOUNT1/a
-    replay_barrier mds
+    replay_barrier mds1
     kill -USR1 $pid1
     wait $pid1 || return 1
 
-    fail mds
+    fail mds1
     kill -USR1 $pid2
     wait $pid2 || return 1
     [ -e $MOUNT2/a ] && return 2
@@ -175,14 +189,35 @@ test_6() {
 }
 run_test 6 "open1, open2, unlink |X| close1 [fail mds] close2"
 
+test_6b() {
+    mcreate $MOUNT1/a
+    multiop $MOUNT2/a o_c &
+    pid1=$!
+    multiop $MOUNT1/a o_c &
+    pid2=$!
+    # give multiop a chance to open
+    sleep 1
+    rm -f $MOUNT1/a
+    replay_barrier mds1
+    kill -USR1 $pid2
+    wait $pid2 || return 1
+
+    fail mds1
+    kill -USR1 $pid1
+    wait $pid1 || return 1
+    [ -e $MOUNT2/a ] && return 2
+    return 0
+}
+run_test 6b "open1, open2, unlink |X| close2 [fail mds] close1"
+
 test_7() {
-    replay_barrier mds
+    replay_barrier mds1
     createmany -o $MOUNT1/$tfile- 25
     createmany -o $MOUNT2/$tfile-2- 1
     createmany -o $MOUNT1/$tfile-3- 25
     umount $MOUNT2
 
-    facet_failover mds
+    facet_failover mds1
     # expect failover to fail
     df $MOUNT && return 1
 
@@ -196,9 +231,9 @@ run_test 7 "timeouts waiting for lost client during replay"
 
 
 test_8() {
-    replay_barrier mds
+    replay_barrier mds1
     drop_reint_reply "mcreate $MOUNT1/$tfile"    || return 1
-    fail mds
+    fail mds1
     checkstat $MOUNT2/$tfile || return 2
     rm $MOUNT1/$tfile || return 3
 
@@ -207,12 +242,12 @@ test_8() {
 run_test 8 "replay of resent request"
 
 test_9() {
-    replay_barrier mds
+    replay_barrier mds1
     mcreate $MOUNT1/$tfile-1
     mcreate $MOUNT2/$tfile-2
     # drop first reint reply
     sysctl -w lustre.fail_loc=0x80000119
-    fail mds
+    fail mds1
     sysctl -w lustre.fail_loc=0
 
     rm $MOUNT1/$tfile-[1,2] || return 1
@@ -223,12 +258,12 @@ run_test 9 "resending a replayed create"
 
 test_10() {
     mcreate $MOUNT1/$tfile-1
-    replay_barrier mds
+    replay_barrier mds1
     munlink $MOUNT1/$tfile-1
     mcreate $MOUNT2/$tfile-2
     # drop first reint reply
     sysctl -w lustre.fail_loc=0x80000119
-    fail mds
+    fail mds1
     sysctl -w lustre.fail_loc=0
 
     checkstat $MOUNT1/$tfile-1 && return 1
@@ -240,7 +275,7 @@ test_10() {
 run_test 10 "resending a replayed unlink"
 
 test_11() {
-    replay_barrier mds
+    replay_barrier mds1
     mcreate $MOUNT1/$tfile-1
     mcreate $MOUNT2/$tfile-2
     mcreate $MOUNT1/$tfile-3
@@ -248,7 +283,7 @@ test_11() {
     mcreate $MOUNT1/$tfile-5
     # drop all reint replies for a while
     sysctl -w lustre.fail_loc=0x0119
-    facet_failover mds
+    facet_failover mds1
     #sleep for while, let both clients reconnect and timeout
     sleep $((TIMEOUT * 2))
     sysctl -w lustre.fail_loc=0
@@ -260,7 +295,7 @@ test_11() {
 run_test 11 "both clients timeout during replay"
 
 test_12() {
-    replay_barrier mds
+    replay_barrier mds1
 
     multiop $DIR/$tfile mo_c &
     MULTIPID=$!
@@ -268,7 +303,7 @@ test_12() {
 
     # drop first enqueue
     sysctl -w lustre.fail_loc=0x80000302
-    facet_failover mds
+    facet_failover mds1
     df $MOUNT || return 1
     sysctl -w lustre.fail_loc=0
 
@@ -287,14 +322,14 @@ test_13() {
     MULTIPID=$!
     sleep 5
 
-    replay_barrier mds
+    replay_barrier mds1
 
     kill -USR1 $MULTIPID || return 3
     wait $MULTIPID || return 4
 
     # drop close 
     sysctl -w lustre.fail_loc=0x80000115
-    facet_failover mds
+    facet_failover mds1
     df $MOUNT || return 1
     sysctl -w lustre.fail_loc=0
 
@@ -306,27 +341,6 @@ test_13() {
 }
 run_test 13 "close resend timeout"
 
-test_7() {
-    mcreate $MOUNT1/a
-    multiop $MOUNT2/a o_c &
-    pid1=$!
-    multiop $MOUNT1/a o_c &
-    pid2=$!
-    # give multiop a chance to open
-    sleep 1
-    rm -f $MOUNT1/a
-    replay_barrier mds
-    kill -USR1 $pid2
-    wait $pid2 || return 1
-
-    fail mds
-    kill -USR1 $pid1
-    wait $pid1 || return 1
-    [ -e $MOUNT2/a ] && return 2
-    return 0
-}
-run_test 7 "open1, open2, unlink |X| close2 [fail mds] close1"
-
 if [ "$ONLY" != "setup" ]; then
 	equals_msg test complete, cleaning up
 	cleanup

lustre/tests/replay-ost-single.sh

@@ -7,7 +7,7 @@ LUSTRE=${LUSTRE:-`dirname $0`/..}
 
 init_test_env $@
 
-. ${CONFIG:=$LUSTRE/tests/cfg/local.sh}
+. ${CONFIG:=$LUSTRE/tests/cfg/lmv.sh}
 
 ostfailover_HOST=${ostfailover_HOST:-$ost_HOST}
 
@@ -17,14 +17,28 @@ ALWAYS_EXCEPT="5"
 
 gen_config() {
     rm -f $XMLCONFIG
-    add_mds mds --dev $MDSDEV --size $MDSSIZE
-    add_lov lov1 mds --stripe_sz $STRIPE_BYTES \
-	--stripe_cnt $STRIPES_PER_OBJ --stripe_pattern 0
+    if [ "$MDSCOUNT" -gt 1 ]; then
+        add_lmv lmv1
+        for mds in `mds_list`; do
+            MDSDEV=$TMP/${mds}-`hostname`
+            add_mds $mds --dev $MDSDEV --size $MDSSIZE  --lmv lmv1
+        done
+        add_lov_to_lmv lov1 lmv1 --stripe_sz $STRIPE_BYTES \
+	    --stripe_cnt $STRIPES_PER_OBJ --stripe_pattern 0
+	MDS=lmv1
+    else
+        add_mds mds1 --dev $MDSDEV --size $MDSSIZE
+        add_lov lov1 mds1 --stripe_sz $STRIPE_BYTES \
+	    --stripe_cnt $STRIPES_PER_OBJ --stripe_pattern 0
+	MDS=mds1_svc
+
+    fi
+
     add_ost ost --lov lov1 --dev $OSTDEV --size $OSTSIZE --failover
     if [ ! -z "$ostfailover_HOST" ]; then
 	 add_ostfailover ost --dev $OSTDEV --size $OSTSIZE
     fi
-    add_client client mds --lov lov1 --path $MOUNT
+    add_client client --mds $MDS --lov lov1 --path $MOUNT
 }
 
 cleanup() {
@@ -35,7 +49,9 @@ cleanup() {
         fail ost
     fi
     zconf_umount `hostname` $MOUNT
-    stop mds ${FORCE} $MDSLCONFARGS
+    for mds in `mds_list`; do
+	stop $mds ${FORCE} $MDSLCONFARGS
+    done
     stop ost ${FORCE} --dump cleanup.log
 }
 
@@ -55,7 +71,9 @@ setup() {
 
     start ost --reformat $OSTLCONFARGS
     [ "$DAEMONFILE" ] && $LCTL debug_daemon start $DAEMONFILE $DAEMONSIZE
-    start mds --reformat $MDSLCONFARGS
+    for mds in `mds_list`; do
+	start $mds --reformat $MDSLCONFARGS
+    done
     grep " $MOUNT " /proc/mounts || zconf_mount `hostname` $MOUNT
 }